Owner manual

4 Universal Control-AI and VSL-AI
4.9 Smaart System Check Wizards
StudioLive
™
AI Software Library
Reference Manual
40
Basic Analysis
1. Select Basic Analysis from the pull-down menu.
2. Place your microphone on-axis in front of the speaker you want to analyze. If you
are analyzing a stereo bus, place your microphone on-axis in front of the Left
speaker. See Section 4.9.5 for tips in choosing the best primary mic position.
1
3. Click OK when your microphone is properly placed.
4. It is now time to make some noise—pink noise, that is. Raise the fader until
the pink-noise output through your speaker is louder than the ambient
noise floor in the room. At the appropriate measurement level, you
should not hear the air conditioning, traffic noise from the street, etc.
5. To mute the pink noise at any time, simply click on the Speaker icon.
6. Click OK when the pink noise is at the appropriate level.