Owner manual

4 Universal Control-AI and VSL-AI
4.9 Smaart System Check Wizards
StudioLive
™
AI Software Library
Reference Manual
46
5. From the bottom pull-down menu, select the speaker output
to which you’d like to align. This can be your main outputs or
any of the subgroup outputs, even if the subgroup outputs
have been delayed.
6. Click OK to start the wizard.
7. Place your microphone on-axis in front of the speaker you want to delay.
See Section 4.9.5 for tips in choosing the best primary mic position.
1
8. Click OK when your microphone is properly placed.
9. Raise the fader until the pink noise outputted through your main system
(the speaker to which you want to align) is louder than the ambient noise
floor in the room. At the appropriate measurement level, you should
not hear the air conditioning, traffic noise from the street, etc.
10. To mute the pink noise at any time, simply click on the Speaker icon.