StudioLive RML-Series Mixers ™ Touch-Software-Controlled, Rack-mount Digital Mixing System with Active Integration™ Owner’s Manual ® www.presonus.
Table of Contents 1 Overview — 1 1.1 Introduction — 1 1.2 StudioLive RML-series Digital Mixer Features — 1 1.3 What is in the Box — 3 1.4 What You Will Need — 4 1.5 About This Manual — 5 1.6 Technical Support — 5 2 Getting Started — 6 2.1 System Setup Overview — 7 2.2 Registering Your StudioLive RML-series Mixer — 7 2.3 Powering the StudioLive RML-series Mixer — 9 3 Networking the RML-series Mixer — 10 3.1 Minimum Computer System Requirements — 10 3.
Statutory Warranty — 64 7.3 What This Warranty Covers — 64 7.4 Exclusions and Limitations — 64 7.5 Who This Warranty Protects — 65 7.6 How Long This Warranty Lasts — 65 7.7 What PreSonus Will Do — 65 7.8 How to Get Warranty Service (USA) — 65 7.9 How to Get Warranty Service (outside of USA) — 65 7.10 Limitation of Implied Warranties — 66 7.
1 1.1 Overview Introduction 1 Overview 1.1 Introduction StudioLive™ RML-Series Mixers Owner’s Manual Thank you for purchasing a PreSonus® StudioLive™ RML-series Active Integration™ digital mixer. PreSonus Audio Electronics, Inc., has designed the RML32AI and RML16AI utilizing high-grade components to ensure optimum performance that will last a lifetime.
1 1.
StudioLive™ RML-Series Mixers Owner’s Manual 1 1.3 Overview What is in the Box 1.
1 1.4 StudioLive™ RML-Series Mixers Owner’s Manual Overview What You Will Need What is not in the box: StudioLive RML-Series Mixers • This manual. • StudioLive AI Software Library Manual • StudioLive AI Software Library ™ Touch-Software-Controlled, Rack-mount Digital Mixing System with Active Integration™ Owner’s Manual ® www.presonus.
StudioLive™ RML-Series Mixers Owner’s Manual 1 1.5 Overview About This Manual 1.5 About This Manual We suggest that you use this manual to familiarize yourself with the features, applications, and connection procedures for your StudioLive RML-series mixer before trying to connect it to your computer. This will help you avoid problems during installation and setup. This manual covers hardware functions for the StudioLive RML32AI and RML16AI 32x16x3 rack-mount Active Integration™ digital mixers.
StudioLive™ RML-Series Mixers Owner’s Manual 2 1.
StudioLive™ RML-Series Mixers Owner’s Manual 2 2.1 Getting Started System Setup Overview 2.1 System Setup Overview It only takes a few steps to get your StudioLive RML-series mixer up and running: • Register your StudioLive RML-series mixer in your My PreSonus account. • Download the StudioLive AI Software Library.** • Install the software.** • Connect the RML-series mixer to AC power using the included IEC power cord.
2 2.2 Getting Started Registering Your StudioLive RML-series Mixer StudioLive™ RML-Series Mixers Owner’s Manual 2. Log in or create a new account if you don’t already have one. 3. After logging into your account, click/tap the “Register A Product” button in the My Hardware section. 4. Enter the information for your RML-series mixer and click/tap the Register button. 5. You now can download and authorize the included software and can download the manuals and video guides as well as firmware updates.
2 2.3 Getting Started Powering the StudioLive RML-series Mixer 2.3 Powering the StudioLive RML-series Mixer StudioLive™ RML-Series Mixers Owner’s Manual When you power a StudioLive RML-series mixer, the Power/Status indicator displays the current state of the mixer in one of the following ways. Off: The mixer is switched off. Solid blue: Powered up, connected to a control device, and functioning properly. Flashing blue: In the process of booting up or loading a firmware update.
3 3.1 Networking the RML-series Mixer Minimum Computer System Requirements 3 Networking the RML-series Mixer 3.1 Minimum Computer System Requirements StudioLive™ RML-Series Mixers Owner’s Manual Mac • macOS 10.
3 3.2 Networking the RML-series Mixer Networking Overview 3.2 Networking Overview StudioLive™ RML-Series Mixers Owner’s Manual Networking your RML-series mixer involves both hardware and software components. The entire installation and configuration procedure is given in this manual, but before beginning, you must download and install UC Surface touch-control software onto a Mac or Windows computer or an iPad, as described in the StudioLive AI Software Library Manual.
3 3.2 Networking the RML-series Mixer Networking Overview StudioLive™ RML-Series Mixers Owner’s Manual Making Control Data Connections The recommended way to connect your StudioLive RML mixer is with a wired connection. • Using a CAT5e or CAT6 Ethernet cable, connect the mixer directly to a router. If a wired connection is available, the RML mixer will not scan for wireless networks. Once you make the connection, the RML-series mixer will be shown in the Universal Control launch window.
StudioLive™ RML-Series Mixers Owner’s Manual 3 3.3 Networking the RML-series Mixer Wired Ethernet Control Setup 3.3 Wired Ethernet Control Setup A wired Ethernet setup is the simplest: 1. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
3 3.4 Networking the RML-series Mixer Wireless Control Setup 3.
3 3.4 StudioLive™ RML-Series Mixers Owner’s Manual Networking the RML-series Mixer Wireless Control Setup 3. Power on the RML-series mixer and wait until the Power LED has turned solid red. STUDIOLIVE RML32 32X25 Digital Mixer 32 XMAX Preamps 96k/24bit Audio WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
3 3.4 Networking the RML-series Mixer Wireless Control Setup 8. StudioLive™ RML-Series Mixers Owner’s Manual Click/tap the Networking tab. Select the gear icon under the wireless network section and the network list view appears, showing all of the wireless networks being seen by the RML mixer. Note: Scanning for networks can take a little time.
3 3.4 StudioLive™ RML-Series Mixers Owner’s Manual Networking the RML-series Mixer Wireless Control Setup 1. Look for a wired Ethernet connection and use it if one is found. 2. If no wired connection is found, it will check whether the USB Wi-Fi LAN adapter is plugged in. 3. If the Wi-Fi LAN adapter is found, the mixer will look for, and attempt to connect to, the wireless network it has been configured to use. Note: StudioLive RML-series mixers support only WPA and WPA2 security.
3 3.5 Networking the RML-series Mixer Connecting Your Computer to Your Network in Software 3.5 Connecting Your Computer to Your Network in Software StudioLive™ RML-Series Mixers Owner’s Manual Windows 7+ 1. Click/tap on the network icon in the notification area to open the Connect to Network Control Panel. 2. Select the same wireless network to which you configured your RML-series mixer. 3. Enter the network password or key.
3 3.5 Networking the RML-series Mixer Connecting Your Computer to Your Network in Software StudioLive™ RML-Series Mixers Owner’s Manual 4. Click/tap Connect. macOS 10.8 and later 1. On the Menu bar, click/tap on the Wireless Status icon. 2. From the pull-down menu select the same wireless network for which you configured your RML-series mixer.
3 3.6 Networking the RML-series Mixer Connecting an iPad to Your Network StudioLive™ RML-Series Mixers Owner’s Manual 3. Enter the network password or key. 4. Click/tap Join. 3.6 Connecting an iPad to Your Network 1. Tap the Settings icon in your iPad. 2. Tap Wi-Fi in the settings list on the right.
3 3.6 Networking the RML-series Mixer Connecting an iPad to Your Network StudioLive™ RML-Series Mixers Owner’s Manual 3. Wi-Fi will usually be switched on. If it is not, slide the onscreen switch to turn it on. 4. In the Choose a Network section, you should see in the list the network for which you have configured the RML-series mixer. Tap the network to select it. If you do not see the network, you will need to troubleshoot your network setup. 5.
3 3.6 Networking the RML-series Mixer Connecting an iPad to Your Network StudioLive™ RML-Series Mixers Owner’s Manual 6. Tap the Information icon to the right of the network’s name to open its network settings. 7. Switch Auto-Join to On. You are now ready to launch UC Surface and mix on the go. Your iPad will join this network whenever it is started up and detects the network’s presence.
3 3.7 Networking the RML-series Mixer Connecting an iPhone/iPod touch to Your Network 3.7 Connecting an iPhone/iPod touch to Your Network StudioLive™ RML-Series Mixers Owner’s Manual 1. Tap on the Settings icon in your iPhone/iPod touch. 2. Tap “Wi-Fi,” making sure it is set to “On.” 3. Under “Choose a Network,” tap on the same wireless network for which you configured your RML-series mixer to select it.
3 3.8 Networking the RML-series Mixer How to Update StudioLive RML mixer Firmware StudioLive™ RML-Series Mixers Owner’s Manual 4. Enter the password when prompted and tap Join. Important: You must connect your computer and iOS devices to the same network as your RML-series mixer each time you want to control it remotely using UC Surface or QMix-AI. 3.8 How to Update StudioLive RML mixer Firmware Please be sure to review all instructions before updating your StudioLive RML-series mixer.
3 3.8 Networking the RML-series Mixer How to Update StudioLive RML mixer Firmware StudioLive™ RML-Series Mixers Owner’s Manual To update your StudioLive RML’s firmware: 1. Make a wired network connection to the RML mixer as described in Section 3.3 Wired Ethernet Control Setup. 2. Download the firmware files for your mixer from your My PreSonus account. To find these files, click on the “View More Details” link in your StudioLive registration and click the “Firmware” tab in the Details area. 3.
3 3.8 Networking the RML-series Mixer How to Update StudioLive RML mixer Firmware StudioLive™ RML-Series Mixers Owner’s Manual 5. Open the firmware folder; you will find five files inside: • Initvars.scr • Recovery.scr • Rootfs.img • uImage • Upgrade.bin You will need all five files to upgrade your mixer. 6. Connect a FAT32-formatted USB thumb drive to your computer. Power User Tip: Most small USB drives (16 GB or less) are already formatted correctly, so no formatting is required.
3 3.8 StudioLive™ RML-Series Mixers Owner’s Manual Networking the RML-series Mixer How to Update StudioLive RML mixer Firmware 8. Remove your Wi-Fi LAN adapter (if inserted) and insert the thumb drive into the USB slot on the front of your StudioLive RMLseries mixer. (Power on the mixer if it is not already on.
3 3.9 Networking the RML-series Mixer Setting Permissions 3.9 Setting Permissions StudioLive™ RML-Series Mixers Owner’s Manual Controlling your StudioLive RML mixer with an iPad, or allowing band members to control their aux mixes remotely with an iPhone/iPod touch, is extremely convenient. However, it can also put control of the RML mixer in multiple hands— some more adept than others.
3 3.9 Networking the RML-series Mixer Setting Permissions StudioLive™ RML-Series Mixers Owner’s Manual 5. Click/tap in the Mix field and choose from the drop-down menu what you want the iOS device to control. • All Auxes: Allows the user of the selected device to make channel fader adjustments for all aux mixes. • Aux 1-16: A single aux mix (or stereo linked pair) can be chosen to limit access by the user of the selected device to channel fader levels for the specified aux mix.
3 3.9 Networking the RML-series Mixer Setting Permissions StudioLive™ RML-Series Mixers Owner’s Manual Once you have connected and configured permissions for an iOS device, the permissions will remain the same for that device every time you connect it unless you change the permissions. Complete information about QMix-AI can be found in the StudioLive-AI Software Library Manual. Setting Permissions for UC Surface Multiple instances of UC Surface can be run simultaneously on different devices.
3 3.9 Networking the RML-series Mixer Setting Permissions StudioLive™ RML-Series Mixers Owner’s Manual • FOH: Gives the user of the selected device full access to all UC Surface functions, making that device the RML control master. • All Auxes: Allows the user of the selected device to make channel fader adjustments that affect all aux mixes.
3 3.9 Networking the RML-series Mixer Setting Permissions StudioLive™ RML-Series Mixers Owner’s Manual To change an access code: 1. Click/tap the Global Settings button to open the Global Settings view. 2. Click/tap the Device Settings tab. 3. Click/tap the Change Access Code button. 4. In the dialog, enter the current access code, the new code, and then the new code a second time to confirm. 5. Click/tap OK to submit the new access code or Cancel to exit the dialog without changing the access code.
3 3.10 Networking the RML-series Mixer FireWire Audio Setup 3.10 FireWire Audio Setup StudioLive™ RML-Series Mixers Owner’s Manual WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. AVIS: This Class , B digital apparatus complies with , Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
3 3.11 StudioLive™ RML-Series Mixers Owner’s Manual Networking the RML-series Mixer Configuration Examples 4. With Windows, the RML-series mixer uses a PreSonus FireStudio ASIO driver, installed with UC Surface, and shows up in the Sound control panel as a PreSonus FireStudio interface.
3 3.11 StudioLive™ RML-Series Mixers Owner’s Manual Networking the RML-series Mixer Configuration Examples 2. One computer for control and audio, with the computer connected wirelessly to the router and the RML mixer hardwired via Ethernet to the router.
3 3.11 StudioLive™ RML-Series Mixers Owner’s Manual Networking the RML-series Mixer Configuration Examples 5. Separate computers for control and audio, with the control computer (an iPad, in this example) connected wirelessly to the router.
StudioLive™ RML-Series Mixers Owner’s Manual 4 4.1 Connecting Your RML-series Mixer to Your Audio System Before You Begin 4 Connecting Your RML-series Mixer to Your Audio System Your RML-series mixer has many input and output connections. We’ll explain each one here, then show a few examples of how the RML-series mixer can be put to some common uses. 4.
4 4.2 Connecting Your RML-series Mixer to Your Audio System Connecting Channel Inputs 4.2 Connecting Channel Inputs 4.2.1 Connecting Microphones StudioLive™ RML-Series Mixers Owner’s Manual Your StudioLive RML-series mixer is equipped with 24/8 recallable PreSonus XMAX microphone preamplifiers for use with all types of microphones. The XMAX preamplifier has a Class A input buffer allowing you to boost signals without increasing unwanted background noise.
4 4.4 Connecting Your RML-series Mixer to Your Audio System Connecting Mix Outputs 4.4 Connecting Mix Outputs StudioLive™ RML-Series Mixers Owner’s Manual Mixes appear on the following connectors: • Aux mixes are on 16/8 front-panel male XLR jacks and rear-panel DB25 connectors. • Main mix on a front-panel stereo pair of male XLR jacks, with dedicated level control, and in S/PDIF digital format on a rear-panel RCA jack.
4 4.5 StudioLive™ RML-Series Mixers Owner’s Manual Connecting Your RML-series Mixer to Your Audio System Connecting Headphones The Mono mix output is most commonly used for one of two purposes: • As a subwoofer feed; the Fat Channel EQ for the Mono output in the UC Surface software includes a lowpass filter that is used in this application. For more information, see the StudioLive AI Software Library Reference Manual.
4 4.6 Connecting Your RML-series Mixer to Your Audio System Muting All Inputs StudioLive™ RML-Series Mixers Owner’s Manual To monitor on phones: 1. Turn the level control all the way down. 2. Press the Main button to select the main mix for monitoring, or the Cue button to select the current cue source. 3. Connect a pair of headphones to the jack. 4. Slowly raise the level to the desired listening level. By default, the cue source is set to monitor the stereo solo bus.
4 4.8 Connecting Your RML-series Mixer to Your Audio System Let’s Get a Sound and Set a Level! StudioLive™ RML-Series Mixers Owner’s Manual Meters/+48V Select Button The Meters/+48V button switches the meters between displaying signal levels, and showing which inputs are using +48V phantom power. In its default state, the button is off, and the meters display the signal levels. To toggle the meters to display channels with +48V phantom power active: 1. Press and release the Meters/+48V button.
4 4.8 Connecting Your RML-series Mixer to Your Audio System Let’s Get a Sound and Set a Level! Phones Tape In Mono Out StudioLive™ RML-Series Mixers Owner’s Manual 3. If you’re using passive speakers, connect them to your power amplifier using speaker cables. 4. Plug your RML-series mixer into a power outlet and turn it on.
4 4.8 Connecting Your RML-series Mixer to Your Audio System Let’s Get a Sound and Set a Level! StudioLive™ RML-Series Mixers Owner’s Manual 6. Launch the UC Surface software and select your mixer for control. 7. Go to Channel 1 of the UC Surface mixer. The Fat Channel section displays the channel’s settings. 8. If your microphone requires phantom power, engage the Fat Channel +48V button.
4 4.8 Connecting Your RML-series Mixer to Your Audio System Let’s Get a Sound and Set a Level! 9. StudioLive™ RML-Series Mixers Owner’s Manual Speak or sing into your microphone at approximately the same volume you expect during the performance. 10. Move the Fat Channel Preamp slider up while watching the input meter on the Channel Strip and adjust the input gain until the meter reaches a little more than halfway up. The meter should never go into the red area at the top.
4 4.9 Connecting Your RML-series Mixer to Your Audio System Diagrams of Typical Setups StudioLive™ RML-Series Mixers Owner’s Manual 11. Raise the Channel 1 fader until it reaches 0 dB (unity gain). Phones Tape In Mono Out Main Out L R -80 -80 +6 Level 8 9 10 11 12 +6 Level 13 14 Left 15 Right 12. In UC Surface, bring up the Main mix level fader until you can comfortably listen to your microphone through your speakers.
4 4.9 StudioLive™ RM-Series Mixers Owner’s Manual Connecting Your RML-series Mixer to Your Audio System Diagrams of Typical Setups 4.9.
4 4.9 StudioLive™ RM-Series Mixers Owner’s Manual Connecting Your RML-series Mixer to Your Audio System Diagrams of Typical Setups 4.9.
4 4.9 StudioLive™ RM-Series Mixers Owner’s Manual Connecting Your RML-series Mixer to Your Audio System Diagrams of Typical Setups 4.9.
4 4.9 StudioLive™ RM-Series Mixers Owner’s Manual Connecting Your RML-series Mixer to Your Audio System Diagrams of Typical Setups 4.9.
StudioLive™ RML-Series Mixers Owner’s Manual 5 5.1 RML mixer Reference Front Panel 5 RML mixer Reference This chapter simply documents the function of each control and setting on your RML-series mixer. Of course, most of its settings are in UC Surface software and so are discussed in the StudioLive AI Software Library Manual. Covered here are the features found on the hardware mixer. For technical details, such as input and output levels, see Section 5.4 RML16AI and RML32AI Technical Specifications. 5.
5 5.1 StudioLive™ RML-Series Mixers Owner’s Manual RML mixer Reference Front Panel Meters/+48V button: Switches the front-panel meter LEDs between displaying signals at channel inputs and indicating which channels have +48V phantom power enabled. For more information, see Section 4.7 Metering.
5 5.1 RML mixer Reference Front Panel StudioLive™ RML-Series Mixers Owner’s Manual Tape In jacks A stereo pair of unbalanced inputs on RCA jacks, useful for returning all varieties of consumer music players and devices. For more information, see Section 4.3 Connecting a Stereo Playback Device. Mono/Center Out section The Mono/Center output carries the Mono or Center mix and is convenient for feeding mono sound systems, such as a center channel send for true LCR mixing or a subwoofer send.
5 5.2 StudioLive™ RML-Series Mixers Owner’s Manual RML mixer Reference Rear Panel Mic Inputs The 32/16 balanced XLR inputs accept a wide range of signals, from mic level to line level. The XMAX microphone preamplifiers feature Class A input buffers, ultra-low noise, and wide gain control, allowing you to boost signals without increasing unwanted background noise. Each input can also provide +48 V phantom power.
5 5.3 RML mixer Reference StudioLive RML-series Mixer Block Diagrams StudioLive™ RML-Series Mixers Owner’s Manual Option Card Each option card features a different communications format, such as AVB or Dante, but all cards share the other facilities. The AVB card is provided by default. AVB (Audio Video Bridging) is an extension to the Ethernet standard designed to provide what network geeks call “quality of service,” which simply means a guarantee that audio samples reach their destinations on time.
StudioLive™ RML-Series Mixers Owner’s Manual 5 5.4 RML mixer Reference RML16AI and RML32AI Technical Specifications 5.4 RML16AI and RML32AI Technical Specifications RML16AI RML32AI XLR Female, balanced, locking XLR Female, balanced, locking Frequency Response to Direct Output (at unity gain) 20-40 kHz, ±0.5 dBu 20-40 kHz, ±0.5 dBu Frequency Response to Main Output (at unity gain) 20-20 kHz, ±0.5 dBu 20-20 kHz, ±0.5 dBu 1 kΩ 1 kΩ 0.005%, +4 dBu, 20-20 kHz, unity gain, unwtd 0.
5 5.4 StudioLive™ RML-Series Mixers Owner’s Manual RML mixer Reference RML16AI and RML32AI Technical Specifications RML16AI RML32AI -84 dB to 0 dB -84 dB to 0 dB Attack Time 0.02s to 500 ms / 0.5 ms 0.02s to 500 ms / 0.5 ms Release Time 0.05s to 2s 0.05s to 2s Expander Attenuation Range 2:1 (fixed) 2:1 (fixed) Noise Gate Attenuation Range -84 to 0 dB -84 to 0 dB Key Filter 2nd-order, resonant bypass; Q=0.7 2nd-order, resonant bypass; Q=0.
5 5.4 StudioLive™ RML-Series Mixers Owner’s Manual RML mixer Reference RML16AI and RML32AI Technical Specifications RML16AI RML32AI ADC Dynamic Range 118 dB (A-wtd, 48 kHz) 118 dB (A-wtd, 48 kHz) DAC Dynamic Range 118 dB (A-wtd, 48 kHz) 118 dB (A-wtd, 48 kHz) S800, 800 Mb/s S800, 800 Mb/s RCA Female RCA Female Internal Processing 32-bit, floating point 32-bit, floating point Sampling Rate 44.1, 48, 88.2, 96 kHz 44.1, 48, 88.
6 6.1 Resources Stereo Microphone Placement 6 Resources 6.1 Stereo Microphone Placement StudioLive™ RML-Series Mixers Owner’s Manual The following are a few recording applications to help you get started with your StudioLive RML-series mixer. These are by no means the only ways to record these instruments. Microphone selection and placement is an art. For more information about recording techniques, visit your library or local bookstore or search the Web.
6 6.1 Resources Stereo Microphone Placement StudioLive™ RML-Series Mixers Owner’s Manual Acoustic Guitar Point a small-diaphragm condenser microphone at the 12th fret, approximately 8 inches away. Point a large- diaphragm condenser microphone at the bridge of the guitar, approximately 12 inches from the guitar. Experiment with distances and microphone placement. Another popular method is using an XY microphone placement with two small-diaphragm condenser microphones. (See Drum Overheads picture.
6 6.1 Resources Stereo Microphone Placement StudioLive™ RML-Series Mixers Owner’s Manual Drum Overheads (XY example) Place two small-diaphragm condenser microphones on an XY stereo-microphone holder (bar). Position the microphones so that each one is at a 45-degree angle, pointed down at the drum kit, approximately 7 or 8 feet above the floor or drum riser. Experiment with height. This technique can be used in live applications as well.
StudioLive™ RML-Series Mixers Owner’s Manual 6 6.2 Resources Troubleshooting 6.2 Troubleshooting PreSonus telephone technical support is available to customers in the USA on Monday through Friday from 9 a.m. to 5 p.m. Central Time by calling 1-225- 216-7887. Customers outside of the USA should contact their national or regional distributor for telephone technical support. A list of international distributors is provided at www.presonus.com/buy/international_distributors.
6 6.2 StudioLive™ RML-Series Mixers Owner’s Manual Resources Troubleshooting No Output on the Solo Bus While Monitoring • Verify that the Cue button is enabled (lit) in the Phones Monitor area on the RML-series mixer’s front panel. • In the Global Settings view of UC Surface, check the following settings: -- Verify that the Cue Source setting in the Global Settings view of UC Surface is set to Solo.
7 7.1 Warranty Information How Consumer Law Relates To This Warranty 7 Warranty Information StudioLive™ RML-Series Mixers Owner’s Manual PreSonus’ warranty obligations for this hardware product are limited to the terms set forth below: 7.1 How Consumer Law Relates To This Warranty THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
7 7.5 Warranty Information Who This Warranty Protects 7.5 Who This Warranty Protects StudioLive™ RML-Series Mixers Owner’s Manual This Warranty protects only the original retail purchaser of the product (products that have transferable warranties are excluded from this provision provided the customer and the product are registered with PreSonus) 7.6 How Long This Warranty Lasts A 1-Year Limited Warranty begins on the original date of purchase from the retail purchaser. 7.
7 7.10 Warranty Information Limitation of Implied Warranties 7.10 Limitation of Implied Warranties StudioLive™ RML-Series Mixers Owner’s Manual ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. Some states, countries, or provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 7.
Dinner is Served Added bonus: PreSonus’ previously Top Secret recipe for… Chicken and Andouille Gumbo Ingredients: •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1 C All-Purpose flour ¾ C Vegetable Oil 1 large onion (diced) 1 small onion (quartered) 6 celery stalks (diced) 1 large green bell pepper (diced) 3 cloves garlic (2 minced, 1 whole) 1 lb link Andouille sausage 4 Chicken leg quarters 4 qt water 4 bay leaves 1 tsp thyme 1 tsp Old Bay seasoning 1-2 C frozen okra, sliced ¼ C fresh parsley, minced 6-
StudioLive RML-Series Mixers ™ Touch-Software-Controlled, Rack-mount Digital Mixing System with Active Integration™ Owner’s Manual ® 18011 Grand Bay Ct. • Baton Rouge, Louisiana 70809 USA• 1-225-216-7887 www.presonus.
