User Manual

4 Resources
4.1 Technical Specifications
Temblor T8
Owner’s Manual
9
4 Resources
4.1 Technical Specifications
INPUTS
2- Balanced ¼” TRS
2- Unbalanced RCA
OUTPUTS
2- Balanced ¼” TRS (full range with 80 Hz HPF option)
2- Unbalanced RCA (full range with 80 Hz HPF option)
PERFORMANCE
Frequency Response 30 Hz – 200 Hz
Low Pass Filter Frequency 50 – 130 Hz (variable)
Signal-to-Noise Ratio >98 dB (A-weighted)
THD 0.05%
Amplifier Power 100W RMS / 200W Peak
Power Consumption 120W
Standby Power Consumption <0.5W
Amplifier Type Class AB
Woofer 8” glass-composite with high-density rubber surround
USER CONTROLS
Input Gain Control -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
High Pass Filter Switch On/Off
PROTECTION
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
POWER
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
CABINET
Vinyl-laminated MDF
PHYSICAL
Width 10.2” (260 mm)
Depth 12.6” (320 mm)
Height 11” (280 mm)
Weight 21.2 lbs (9.6 kg)