User guide

CONTROLS & CONNECTIONS

footsteps or other types of vibrations from being transmitted through the

microphone stand into the microphone.

2.7 MASTER

PEAK LIMIT This control adjusts the operating parameters of the Peak

limiter. This device is variable allowing the user to select a point from 0

dBu to +24 dBu. The set point is the point that a signal being processed

will not be allowed to go above. This feature, sometimes referred to as a

“Brick Wall Limiter”, is extremely useful for preventing overloading which is

especially vexing when encountered while recording with digital recording

media.

LEVEL: This control adjusts the output level of the VXP. It functions as a

master fader for the entire processing strip. It is useful for adjusting the

overall output level up or down to match the optimum input level of a

recorder, mixer, etc.

POWER: A lighted push button is located on the front panel for turning the

VXP On and Off.

2.4 BACK PANEL BASIC LAYOUT

PIN 1 GND

PIN 2 High (+)

PIN 3 Low (-)

Cable Wiring Diagram for Input and Output XLR

The Output XLR Connector is servo balanced and operates at +4dBu.