Full Product Manual

1. Normal wear items such as discharge hose, guns,
wands, spray arms, nozzles, quick couplers, o-rings, motor &
generator brushes,
filters, fuses, belts, & tires.
2. Cost of regular maintenance/adjustments, damage from
lack of maintenance or correct operation
3. Damage due to freezing, abrasive fluids, chemical
deterioration, scale build-up, rust, corrosion, thermal
expansion or water ingress.
4. Damage from fluctuation in electrical or water supply.
5. Any product or part that has been altered, modified, over
pressurized, misused, or has been in an accident.
6. Dealer installation or damage from improper installation
of the machine or alteration by a dealer or promise of
additional warranty from dealer. The manufacturer warranty
is not transferable from the dealer to the retail purchaser on
used or rented equipment.
7. Labor is not paid if the dealer that serviced your machine
is not an authorized service center.
8. Labor is not paid on added accessories such as surface
cleaners, hose reels, wastewater recovery, water heaters,
and filtration.
WARRANTY PROVIDED BY OTHERS: Gasoline and diesel
engines, electric motors, and pumps are warranted by the
manufacturer of the component and their warranty is
provided through the manufacturer’s service centers.
Contact your authorized distributor for the closest repair
center. Additional extended warranties may be provided by
engine or pump manufacturer.
GENERAL CONDITIONS: Manufacturer’s responsibility
with respect to claims is limited to making the required repairs
or replacements to the original retail purchaser, and no claim
of breach of warranty shall be cause for any cancellation or
rescission of the contract of sale of any Pressure-Pro
product. Manufacturer reserves the right to change or
improve the design of any of its products or illustrations
without assuming any obligation to modify any
product previously manufactured.
This supersedes any and all previous warranty statements
for products purchased after June 2017. Manufacturer is not
liable for indirect, incidental or consequential damages
including any cost of substitute equipment, loss of revenue,
pecuniary expense or loss, or inability to use a Pressure-
Pro product. Manufacturer disclaims all implied
warranties, including those of merchantability and fitness for
use for a particular purpose. Some states do not allow
exclusions or limitations on how long an implied warranty
lasts, so the above exclusions may not apply to you. It
is the buyer’s responsibility to ensure installation and use
of products conforms to local codes.
Statement of Warranty 2/1/2017
13
13
THANK YOU: The employees and management thank you
for selecting the Pressure-Pro brand product line. The
production and quality assurance team have taken the
greatest care to ensure that your new pressure washer
exceeds the standards set by you, the customer.
YOUR RESPONSIBILITY: An operator’s manual was
compiled for your benefit. By studying and following the
safety, installation, operation, maintenance, and
troubleshooting information contained within, you can look
forward to many years of trouble-free service from your
equipment. Every person who will operate the equipment
must read and follow the safety warning and operating
instruction sections of the owner’s manual prior to use. You
are responsible for operating the product properly and safely.
You are also responsible to follow the maintenance schedule
on the back page of the manual to keep your warranty active.
FREIGHT DAMAGE: If delivered by a trucking company,
please inspect for any concealed freight damage and note
this on the paperwork from the trucking company before
signing. Should you find damage has occurred during
shipping, do not return the damaged merchandise to
manufacturer, but file a claim immediately with the freight
carrier involved.
QUESTIONS: Help us provide you with the fastest service.
Please locate the warranty registration card enclosed and
return it to manufacturer to register your machine.
If problems occur, contact the dealer you bought your
machine from, a local authorized Pressure-Pro service
center, or call manufacturer at 1-[phone] and ask for
technical services.
GETTING STARTED: If your dealer has not prepared the
machine for startup, you may need to connect the hose to the
pressure outlet on the washer and connect the other end of
the hose that swivels to the trigger gun inlet and tighten.
Engine powered pressure washers are shipped from the
manufacturer with the fuel tanks empty. Follow the operation
instructions for starting. Electric motor powered pressure
washers will require an appropriate electric outlet or
disconnect box and an electric plug that is rated for your
machine’s voltage and amperage and matches to your
electrical socket. Smaller machines are equipped with a
ground fault interrupter on the electrical cord and you will
need to press the reset button after it is plugged in.
ONE YEAR PARTS: Manufacturer promises to repair
branded pressure washers if defective in materials or
workmanship for one year from the date of original retail
purchase including the cost of PARTS and LABOR,
excluding transportation/shipping costs and travel time.
ONE YEAR PARTS WARRANTY: Manufacturer will provide
replacement parts on accessories and on all other product
brands including Hydro Twisters, Hydro Vacuum systems
and Hydro Loop.(Labor is not included)
TWO YEAR EVAPORATIVE EMISSIONS CONTROL
SYSTEM WARRANTY: Manufacturer will repair or replace a
defective evaporative emission control system (EECS) part
on your pressure washer for a period of two years. (more
information on next page)
12
Items and Conditions Not Covered: