Product Manual

PROBLEM POSSIBLE CAUSE SOLUTION

ENGINE WILL NOT Low oil shut down is activated Add oil to engine, check more

START BUT WILL frequently.

CRANK OVER

UNDER LOAD, or clear obstruction.

WHENEVER SPRAY GUN

IS TRIGGERED Engine needs to be repaired See engine manual or engine

head

DOES NOT START and breaker.

or starter has been tripped

failure

Engine low or out of fuel Add Fuel.

Fuel filter is clogged Replace or clean fuel filter.

Fuel supply valve-off Turn on fuel supply valve.

Engine flooded or starved Choke only as required.

ENGINE BOGS DOWN Incorrect or obstructed nozzle Replace with the proper nozzle

or replaced dealer.

Operating in high elevation Lower the pressure of the unit

and check for correct engine

speed (RPM)

Carbon deposits on cylinder Remove head and wire brush

deposits.

ELECTRIC MOTOR No electric power Check cord, plug, socket,

Thermal overload in the motor Reset manual overload by

depressing the thermal switch

on the outside of the motor

or starter after the motor has

cooled.

Power switch inoperative Check power switch.

Electric motor or wiring Replace or repair motor

and/or wiring.