Portable DVD Player User Manual

EN-10
Using Car Bag
Follow the steps below to attach the Prestigio Portable DVD Player 590 onto the car seat
headrests.
1. Open up the car bag included and detach hook-and-loop fasteners.
2. Place the device into the car bags with the base at the deeper side.
3. Put attached bands on left and right sides of the base and screen to fix its positions.
4. Re-attach hook-and-loop fasteners to desired positions.
5. Unbuckle and loosen up the strap on the back of car bag.
6. Insert the strap through the gap on the card seat headrest.
7. Adjust the length of the straps to fit the car seat headrest and buckle up.
Product Specifications
Compatible Disc Format DVD±RW/RW, VCD, CD-R/RW, CD-DA,MP3, MPEG4, JPEG
Signal System PAL/NTSC
TFT LCD screen size 9.0 inch
Frequency Response 20Hz～20kHz ±2.5dB
Video Output Output Level: 1.0V
P-P
, Load: 75Ω, unbalanced
Audio Output Output level: 1.4V
rms
, Load: 10KΩ
Audio Signal-to-Noise Rate ≥80dB
Dynamic Range ≥85dB
USB Data Transfer Speed USB1.1
Power Source DC 9~12V
Power Consumption 10W
Operating Temperature 5~40°C
Weight 0.79Kg
Dimensions (L * W * H) 233mm X 170mm X 36mm
Battery Type Lithium Polymer Rechargeable Battery
Technical Support and Warranty Information
Please refer to www.prestigio.com for technical support and included warranty card for warranty
information.
Disclaimer
We make every effort to ensure that the information and procedures in this user manual are accurate
and complete. No liability can and will be accepted for any erros or omissions. Prestigio reserves the
right to make any changes without further notice to any products herein.