The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION 1. To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. 2.
EN Accessories Accessories List ITEM NAME QTY Car Charger 1 Mounting Cradle 1 USB Cable 1 Stylus Pen 1 Driver/Documentation CD 1 User Manual 1 Warranty Card 1 Pouch （for GV5266BT） EN-2 1
Front and Side View 2 3 4 5 1 1. LCD Touch Screen Tap the screen with touch pen or finger to select menu commands or to enter information. 2. Battery Status Indicator The indicator glows in bright amber color when battery is fully charged and in red color when charging. 3. Headphone Port Connects to stereo headphones or headsets. 4. microSD Slot Receives microSD memory card for data access or memory expansion. 5. Mini-USB Port Connect to USB Cable for data access or battery charging.
EN View of Main Unit Rear and Top View 2 1 3 4 1. Speaker Emits sound, voice or music. 2. 3. Backlight Window Reset Button Press to reset the device. 4. Power Button Press to power ON/OFF device.
Inserting microSD Card z To insert a microSD card, place connector towards device and card label towards the front side of the device. z To remove a microSD card, gently press the edge of the card to release the safety lock and pull the card out of the slot. NOTE: Please always make sure that no application is accessing the microSD card before extraction. Connecting to External USB Device (Charging) z Insert the mini USB connector into the appropriate mini USB port.
EN Device Connections Connecting to Earphones z Insert earphone jack (earphones not included) into the appropriate earphone port to switch audio output from device speaker to earphone. NOTE: High volume level is a potential risk to your hearing. Please turn down the volume before connecting the earphone and gradually turn up the volume to a comfortable level. Connecting to Car Charger z Insert USB connector into the appropriate USB port.
About Rechargeable Battery The device is equipped with a built-in rechargeable battery. Please fully charge the battery (for at least 8 hours) before initial use. The battery status indicator glows in red color when charging, and turns green color when the battery is full. Charging time is approximately 2 hours. Working conditions and precautions for the rechargeable battery z z Device with new batteries should be fully charged before initial use.
EN Using Mounting Cradle Device Mounting Procedures The device can be securely mounted on vehicle dashboard or windshield with the mounting cradle included. Please follow procedures below to install the mounting cradle: 1. Select an appropriate location on windshield or dashboard where the device and 2. Please also make sure that the device has a clear view of sky to attain best GPS mounting cradle will not obstruct driver field of vision. reception.
1. Press and hold Power Button to turn on the device. 2. Shortly after the loading screen is shown, the main menu will be displayed. 3. Tap the corresponding buttons with touch pen included to navigate various functions. 4. Press and hold Power Button to turn off the device or to allow the device to enter sleep mode. Sleep OFF 5. Tap Sleep icon to enter sleeping mode or OFF icon to complete turn off the device.
EN Bluetooth Function Main Menu Bluetooth function (optional) The following is shown how to select, switch on/off the Bluetooth function 1. Tap on Function icon on the main menu. 2. Tap on Bluetooth icon to start using Bluetooth function. 3. Tap on ON/OFF icon to enable/ disable Bluetooth function. 4. Tap Info icon to review Bluetooth information. 5. Tap on to reset a new PIN code. The default setting is 1234.
How to operate the Bluetooth function. 1. Tap on DUN icon or HF icon on the main menu. 2. Tap on Paired List icon to start pairing with mobile phone device with GPRS function. 3. Please make sure Bluetooth function on mobile phone is detectable by other devices. 4. Tap on to start searching process. 5. Mobile phone name desired for connection will be displayed on the list when search is completed. 6. Tap on the mobile phone name and tap on to establish connection. 7.
EN Hands Free Function 1. Tap on HF icon on the main menu. NOTE: Please refer to Bluetooth Connection section before connecting by Hands Free function. 2. Tap on Dial icon to make phone calls. 3. Tap on digit buttons and tap on to start dialing. 4. Tap on to answer a call if it is on standby. 5. Tap on to end call. 6. Tap on to switch the call to mobile phone or switch it back to device. 7. Tap on to show dialing keypad to dial more numbers. 8. Tap on Phone Book icon to view phonebook entries.
. Tap on Calls List icon to review call history. 14. Tap to view Dialed Call list, Received Call list, and Missed Call list. 15. Tap / to scroll pages up/down. 16. Select a phonebook entry and tap to make the call. 17. Select a phonebook entry and tap to delete it.
EN FM Function FM function (optional) 1. Tap on Function icon on the main menu. 2. Tap on FM icon to start using Bluetooth function. 3. Tap on / to tune FM frequency down/up. 4. Tap on to open the selected frequency for broadcast. 5. Tap on to save current FM station. 6. Tap on exit.
No. Name 1 Next maneuver 2 Compass 3 Sound 4 Information panels Function Next maneuver on the way and distance up to it. Press this Icon to open route options menu. Press the compass loon to edit map rotation mode, map view and day/night mode. Press this button to turn on/off voice and sound effects. Display time until the end of the trip, total route length, and arrival time. 5 GPS-cursor If GPS connection is established, displays your current location.
Program interface EN No. 10 Name Function Return to You can see the green arrow at the top of the screen if the map current was moved relative to your position. Press it to return view to location your current location. If you zoom In/out with ~Autozoom~ function activated, this 11 Autoscale function will deactivate for a period according to settings. Press 12 MENU 13 Zoom Out Decrease map scale. 14 Zoom In Increase map scale.
No. Name 21 Waypoint 22 “SaveWP” Function Waypoints are manually created by the user and display with red flags on a map. Saves current mark on map as a waypoint.
EN Program interface No. Name 23 “Cursor” 24 Mark on map Function Shows the menu of mark on map Touch the screen with a stylus to set a mark. You can save this mark as a way point add it to the route or see object’s characteristics the mark was set on. 25 Track record 26 Traffic Jams 27 Navitel.SMS 28 “Go To” 29 Insert 30 “Add” 31 “Start” 32 Back 33 Info 34 Back to map 35 Object of interest Track record. Green icon - track record enabled, white icon function disabled.
Autorouting In order to create a route automatically, from the current position to the destination point, tap with the stylus pen on the place on the map where the final point is, tap on the “Cursor” button and in the context menu choose "Go to" (Fig. 1). The calculated route will be shown on the map in blue color with highly visible dark border (Fig. 2).
Autorouting EN Autorouting using search Find an object of interest using “Search” and press it with stylus, then select “Go To” item from the menu. Apart from this item there are also “Insert” — add a point between two points of existing route, and “Add” — point is added to the end of a route and continues it. Both items are available only with existing route. Manual route creation The difference of this route creation method from previous two is what you can set a start point and a destination point.
Additional features EN If your device has GPRS-module, or provides Internet connection via the GPRS-module of your mobile phone through Bluetooth, you will be able to use some «Navitel.Navigator» software features like «Navitel.Traffic» and «Navitel.SMS» services. Navitel.Traffic Using this service you can see the traffic situation in Russia, Ukraine, Belarus or any other country you have official map for. To set the service, go to “Settings” -> «On-line services» -> ”Traffic Jams”.
Troubleshooting EN NOTE: Immediately turn off the device and disconnect the power adapter if the device is not working properly. Never try to repair the unit without authorized professionals for it may damage the unit. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The adaptor doesn’t connect well. Connect the adaptor correctly. The built-in rechargeable battery is weak. Use the adaptor to supply power or charge the battery. There is no sound. The volume may be turned down or mute.
Troubleshooting EN PROBLEM The unit can receive signals now but can’t then; signals received are not stable. POSSIBLE CAUSE POSSIBLE SOLUTION The built-in rechargeable battery is weak. Use the adaptor to supply power or charge the battery. The unit may be obstructed by veil, such as heat insulation paper. Remove the veil. Swing of the unit is too great. Avoid great swing of the unit.
Technical specifications EN MODEL GV5266/5266BT GV4266/4266BT Navigation Software Navitel 5.1 Navitel 5.1 GPS Chipset SiRF Atlas V, 664MHz SiRF Atlas V, 664MHz Channels 64 64 Antenna Internal Internal Interface USB USB Display size 5" 4.
PC Connection EN To establish connection with PC for data access and synchronization, please execute setup file included in the Driver/Documentation CD or download the file from Microsoft website to install: Microsoft Active Sync® software for operating system Microsoft XP or earlier versions (http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-dow nload.mspx) and/or Microsoft Mobile Device Center® software for operating system Microsoft Vista (http://www.microsoft.
EN Disclaimer As the Prestigio products are constantly updated and improved, your device may have a slightly different appearance or modified functionality than presented in this Quick start Guide.
