The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION 1. To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. 2.
EN Accessories Prestigio GeoVision 5850HDDVR–Accessories List ITEM NAME QTY Car Charger 1 USB Cable 1 Car Mount 1 User Manual 1 Warranty Card 1 Document CD 1 EN-2
Prestigio GeoVision 5850HDDVR Front and Side View 2 4 5 6 3 1. 1 LCD Touch Screen Tap the screen with touch pen or finger to select menu commands or to enter information. 2. Battery Status Indicator The indicator glows in bright green color when battery is fully charged and in red color when charging. 3. Microphone Records sound 4. Earphone Jack 5. microSD Slot Connect to earphone or headset. Insert micro SD memory card for data access or memory expansion. 6.
EN View of Main Unit Prestigio GeoVision 5850HDDVR Rear and Top View 1 2 3 4 1. Speaker Emit sound, voice or music. 2. Camera lens 3. Reset Button Press to reboot the device. Take photos or record videos when you’re driving 4. Power Button Press to power the device ON/OFF. 5.
Inserting microSD Card To insert a microSD card, place the connector towards the device and the card label towards the front side of the device. To remove a microSD card, gently press the edge of the card to release the safety lock and pull the card out of the slot. NOTE: Please always make sure that no application is accessing to the micro SD card before extraction. Connecting to External USB Device (Charging) Insert the USB connector into the appropriate USB port.
EN Device Connections Connecting to Car Charger Insert the USB connector into the appropriate USB port. Insert car charger connector into vehicle 12V accessory/cigarette socket to start charging. NOTE: Please connect the car charger to vehicle 12V accessory/cigarette socket after the vehicle engine is started to protect the device from sudden current impulse.
About Rechargeable Battery The device is equipped with a built-in rechargeable battery. Please fully charge the battery (for at least 5 hours) before initial use. The battery status indicator glows in red color when charging and turns bright green color when charging is complete. Charging time is approximately 4 hours. Working conditions and precautions for the rechargeable battery Devices with new batteries should be fully charged before initial use.
EN Getting Started 1. Press and hold Power Button to turn on the device. 2. Shortly after the greeting screen is shown, the main menu will be displayed. 3. Tap the corresponding buttons with touch pen included to navigate through various functions. 4. Press and hold Power Button to turn the device off or to allow the device to enter sleep mode. 5. Tap Sleep icon to put the device to sleep mode or Power Off icon to turn the device off.
Device Settings EN In the main menu, tap on to enter the device settings. You can scroll on the screen upwards / downwards display other settings. to Wireless & Networks Configure the wireless connections, eg: Wi-Fi Sound Adjust sound volume, mute device, or enable warning messages. Display Storage Set the screen brightness, auto-rotate, animation & screen timeout Check the available storage card & device memory.
DVR Function EN 1. Tap on DVR icon on the main menu 2. Tap on to start or video recording; Tap on to start using DVR function. to stop to play the recorded video; Tap on lock key to lock the recording video. 3. Tap on to format the TF card & start-up method of video; Tap on to exit the DVR function. 4. To protect the current video file, you can tap the icon to save it under the directory Save File in case of overwriting of the video file when the memory capacity is in lack. 5.
Device Settings EN 7. To set the parameters of car DVR function, tap the icon setting options to enter the interface as follows: Picture- in-Picture function: tap to prompt the dialog box, select open, the car DVR window will appears on other interface when recording, double tap on the window to enter the recording interface. Whether boot start: select YES, and then the car DVR will automatically run background after booting the device.
Connecting to Wi-Fi EN 1. Select Settings icon to access the list of options. Select Wireless & networks. 2. To turn on/off Wi-Fi, simply slide your finger rightward/leftward on the control bar. 3. The device will scan for available Wi-Fi networks and display them at the bottom of the screen. 4. Tap on the network you want to connect to. Then tap inside the Wireless password field to make the virtual keyboard appear. Enter the required network information, tap on Done, and then tap on Connect. 5.
Program interface EN No. Name 1 Sound Function Sound menu opens by pressing this button Context menu opens by pressing this button. In this menu switches the orientation of the map («North up» - lock icon is next to the compass, «Rotate in accordance with the 2 Compass movement» - route is next to the compass), the type of card (Flat view «2D» and the Panoramic view of the «3D») and the skins («Night», «Day», «Auto»). When driving the compass always points to the North.
Program interface EN No. 8 9 Name Progress-bar Traffic lane 10 Information panel Function Bar is filled in as you approach the place of maneuver. Displays the traffic lanes with valid maneuvers at the next intersection. Shows the name of the street you are currently driving along. Available only if GPS/GLONASS connection is established. If there is no street name, the direction will be shown. 11 Scale button Zoom out. 12 Scale button Zoom in. 13 Navitel.Events * Navitel.
Program interface EN No. Name Function 18 «Save» Saves current marc on map as a waypoint. 19 «Cursor» Shows the point menu.
Program interface EN No. Name Function 20 Mark map on the 21 Track record 22 Traffic Jams 23 Navitel.SMS 24 Software update 25 «Go!» 26 «Route through» 27 «Set start» 28 «Set finish» 29 Map You can set the mark by taping on the map. You can save this mark as a waypoint, add it to the route or see object’s characteristics the mark was set on. Track record. Red dot means that the track is recording, grey dot means that the record stopped. Shows the current traffic jams on a 10-point scale.
Autorouting EN Route to the objects. To create a route to the object with known address, press the «Menu» button at the lower left corner of the screen [1]. Then select «Find», «By address» [2]. Press the «Select country» button and enter its name [4]. To minimize the keyboard, press the icon at the right top of the screen. Select the required country[5]. Menus «Select city», «Select street» and «Select building» will become active [6].
Autorouting EN Route to the selected point on the map. You can set the route to any point on the map. This point will be the end of the route, your current position will become the start of the route. Create a mark on the route by pressing any place on the map[1]. Press the «Cursor», then «Go!»[2]. The route is created[3]. Route from point to point. If you want to create a route from point to point you should create a point on the map[1]. Then set this button as a start route by pressing «Cursor» > «Go!».
Additional features EN If your device has GSM/GPRS module, you will be able to use some «Navitel Navigator» software features like «Navitel. Traffic Jams» and «Navitel .SMS» services. Navitel.Traffic Using this service you can see the information about the traffic jams. To set the service go to «Settings > «Online services» > «Traffic jams». When the service is active the roads are painted in different colors.
Troubleshooting EN Take the steps described in the tables below to solve simple problems before contacting customer service centers. NOTE: Immediately turn off the device and disconnect the power adapter if the device is not working properly. Never try to repair the unit without authorized personnel for it may damage the unit. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The adaptor is not connected well. Connect the adaptor correctly. The built-in rechargeable battery is weak.
PC Connection EN To establish connection with PC for data access and synchronization, please execute setup file included in the Driver/Documentation CD or download the file from Microsoft website to install: Microsoft Active Sync® software for operating system Microsoft XP or earlier versions (http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-dow nload.mspx) and/or Microsoft Mobile Device Center® software for operating system Microsoft Vista (http://www.microsoft.
Technical specifications EN MODEL Navigation Software GPS Chipset DVR Antenna Interface Display size Resolution Display type RAM Flash Expansion slot Battery type/capacity Operating system Speaker Video formats supported Audio formats supported Earphone jack Operating Temperature Operating humidity GV5850HDDVR Navitel BCM4751 120 degrees/720P/1.0 MP/IR Light/30FPS Internal USB 5" 800*480 TFT, Touch screen 512 MB,DDR3 8GB, MLC Micro SD-Card slot, max 32GB Li-poly/1000mAh Android 4.0 Built-in, 1.
