The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION 1. To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. 2.
EN Accessories Accessories List ITEM NAME QTY Car Charger 1 Smart Mount 1 USB Cable 1 Stylus Pen 1 Smart mount user guide 1 Driver/Documentation CD 1 User Manual 1 Warranty Card 1 EN-2
EN View of Main Unit Front and Side View 1 3 4 5 6 7 8 2 1. LCD Touch Screen Tap the screen with touch pen or finger to select menu commands or to enter information. 2. Power Button Press to power ON/OFF the device. 3. Analog TV Antenna Receives television signals. 4. Earphone Port Connect to headphones or headsets. 5. microSD Slot Insert a microSD memory card for data access or memory expansion. 6. Mini-USB Port Connect to USB Cable for data access or battery charging 7.
EN Device Connection Inserting microSD Card z To insert a microSD card, place the connector towards the device and the card label towards the front side of the device. z To remove a microSD card, gently press the edge of the card to release the safety lock and pull the card out of the slot. NOTE: Please always make sure that no application is accessing the microSD card before extraction.
Device Connection EN Connecting to Car Charger z Insert the micro USB connector into the appropriate micro USB port. z Insert car charger connector into vehicle 12V accessory/cigarette socket to start charging. NOTE: Please connect the car charger to vehicle 12V accessory/cigarette socket after the vehicle engine is started to protect the device from sudden surges in current.
EN Cautions on Battery Charging About Rechargeable Battery The device is equipped with a built-in rechargeable battery. Please fully charge the battery (for at least 8 hours) before initial use. The battery status indicator glows in red color when charging and turns bright green color when charging is complete. Charging time is approximately 3 hours for GV5900, 4 hours for GV7900.
1. Press and hold Power Button to turn on device. 2. Shortly after the greeting screen is shown, the main menu will be displayed. 3. Tap the corresponding buttons with touch pen included to navigate various functions. 4. Press and hold Power Button to turn off the device or to allow the device to enter sleep mode.
EN Main Menu Shortly after the welcome screen is shown, main menu will be displayed automatically. The main menu consists of the following sections: Navigation, Multimedia, Analog TV, Bluetooth, EBook, Tools, Game and Settings.
z Tap on to enter System settings. z Tap on to exit. Volume Adjust sound volume. Backlight Adjust the brightness of touch screen. Date Time Set up Time Zone/Date/Time. Calibration Calibrate the screen when position deviation occurs. FM Transmit audio signals from the navigator to radio set. Sys Info Show the system version and serial number etc. Language Select desired language.
EN Analog TV Tap on to enter Analog TV mode detailed as follows. z Tap on to store the current TV channel. z Tap on / to manually/automatically search for a TV channel. Search result is displayed in the list. z Tap on to delete the desired channel. z Tap on to select the region. z Tap on z Tap on / / z Tap on to exit the Analog TV mode. to turn to previous/next item. to adjust volume.
1. Tap on 2. Tap on to start using Bluetooth function. to exit the current file 3. Tap on to open the Bluetooth settings 4. Tap on to change the device name, press the button to switch between letter and number input 5. Tap on PIN.
EN Bluetooth Function (Optional) 6. Tap on to display the connection history 7. Tap on. to search Bluetooth devices 8. Select Bluetooth phone”N73gps”, tap on , and enter the PIN code 1234 9.
10. Tap on 11. Tap on to open dial pad to dial the phone number. 12. Tap on to answer the incoming call 13. Calling number and its ID will be displayed in the Incoming Call.
EN Bluetooth Function (Optional) 14. Tap on to open the phonebook 15. Tap on to open the call history 16. Tap on to open the A2DP 17. Tap on to download SMS from paired mobile phone.
DUN (Optional) 18. 19. Tap on to enter DUN Tap on to establish the connection. 20. Tap on to open IE browser. Tap on to back to the last page; Tap on to skip to the next page; Tap on to refresh the interface; Tap on stop opening the website; Tap on to exit the current interface; Tap on EN-15 to enter input panel to EN The Dial up Networking (DUN) function allows you to connect your navigation device to internet. To enable DUN, please turn on Bluetooth.
Program interface EN No. Name 1 Next maneuver 2 Compass 3 Sound 4 Information panels Function Next maneuver on the way and distance up to it. Press this Icon to open route options menu. Press the compass loon to edit map rotation mode, map view and day/night mode. Press this button to turn on/off voice and sound effects. Display time until the end of the trip, total route length, and arrival time. 5 GPS-cursor If GPS connection is established, displays your current location.
No. 10 Name Function Return to You can see the green arrow at the top of the screen if the map current was moved relative to your position. Press it to return view to location your current location. If you zoom In/out with ~Autozoom~ function activated, this 11 Autoscale function will deactivate for a period according to settings. Press 12 MENU 13 Zoom Out Decrease map scale. 14 Zoom In Increase map scale. 15 Map slope this button to activate ~Autozoom~ function manually.
EN Program interface No. Name 21 Waypoint 22 “SaveWP” Function Waypoints are manually created by the user and display with red flags on a map. Saves current mark on map as a waypoint.
No. Name 23 “Cursor” 24 Mark on map Function Shows the menu of mark on map Touch the screen with a stylus to set a mark. You can save this mark as a way point add it to the route or see object’s characteristics the mark was set on. 25 Track record 26 Traffic Jams 27 Navitel.SMS 28 “Go To” 29 Insert 30 “Add” 31 “Start” 32 Back 33 Info 34 Back to map 35 Object of interest Track record. Green icon - track record enabled, white icon function disabled.
Autorouting EN Autorouting In order to create a route automatically, from the current position to the destination point, tap with the stylus pen on the place on the map where the final point is, tap on the “Cursor” button and in the context menu choose "Go to" (Fig. 1). The calculated route will be shown on the map in blue color with highly visible dark border (Fig. 2).
Autorouting using search Find an object of interest using “Search” and press it with stylus, then select “Go To” item from the menu. Apart from this item there are also “Insert” — add a point between two points of existing route, and “Add” — point is added to the end of a route and continues it. Both items are available only with existing route. Manual route creation The difference of this route creation method from previous two is what you can set a start point and a destination point.
Additional features EN If your device has GPRS-module, or provides Internet connection via the GPRS-module of your mobile phone through Bluetooth, you will be able to use some «Navitel.Navigator» software features like «Navitel.Traffic» and «Navitel.SMS» services. Navitel.Traffic Using this service you can see the traffic situation in Russia, Ukraine, Belarus or any other country you have official map for. To set the service, go to “Settings” -> «On-line services» -> ”Traffic Jams”.
Take the steps described in the tables below to solve simple problems before contacting customer service centers. NOTE: Immediately turn off the device and disconnect the power adapter if the device is not working properly. Never try to repair the unit without authorized personnel for it may damage the unit. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The adaptor is not connected well. Connect the adaptor correctly. The built-in rechargeable battery is weak.
EN Troubleshooting PROBLEM Irregularity or instability in signal receiving. POSSIBLE CAUSE POSSIBLE SOLUTION The built-in rechargeable battery is weak. Use the adaptor to supply power or charge the battery. The unit may be obstructed by material, such as heat insulation paper. Remove the material.