User's Manual

16
User Manual MultiPad PMT5487_3G
Take a photo of yourself
1. Turn on the camera.
2. On the screen, tap .
3. Tap to capture the photo.
Set self timer
1. Turn on the camera.
2. Tap to customise your camera.
3. On the pop-up window, tap > Self timer, select your time span.
4. When you are ready to take a photo, tap . The photo will be captured after the set time span.
Record a video
1. Turn on the camera.
2. Tap .
3. While recording, use the following actions:
- Freely zoom in or out.
- Tap to pause the video recording.
4. To stop recording, tap .
Camera and video settings
Before you take a photo or record a video, customise your camera settings.
1. Turn on the camera.
2. Tap to customise your camera.
3. On the pop-up window, tap / / to switch among general settings, camera and video
settings. The available options vary depending on the mode used.
- GPS location info: Attach a GPS location tag to the photo.
- Exposure: This determines how much light the camera’s sensor receives. For lowlight
situations, use a higher exposure.
- Color Effect: Select among various photo effects to suit your needs.
- Scene mode: Select your desired scene mode.
- White balance: Select an appropriate white balance, so images have a true-to-life colour
range. The settings are designed for specific lighting situations. These settings are similar to
the heat range for white-balance exposure in professional cameras.
- Anti-flicker: Select a band to avoid the impacts on photos caused by flickers from lighting
sources.
- Face detection: Set the ideal exposure and clarity of faces.
- Self timer: Select a time span for shutter delay to take a self-portrait.
- Picture size: Select from various standard sizes for your picture.
- Face beauty: Take a photo with lightened faces for gentler images.
- EIS: The EIS (Electronic Image Stabilization) function helps reduce blurring associated with the
motion of a camera during exposure.
- Microphone: Enable or disenable microphone while recording a video.
- Audio mode: Select an audio mode for your video.
- Time lapse interval: Set the time lapse interval to adjust the speed of your video output.
- Effects: Select the effects for your photos and videos.
- Video quality: Set the quality level for videos as this setting will affect your file size.
To improve GPS signals, avoid shooting in locations where the signal may be obstructed,
such as between buildings or in low-lying areas, or in poor weather conditions. Your
location may appear on your photos when you upload them to the Internet. To avoid this,
deactivate the GPS location info.