Operating Instructions

USER MANUAL | MultiPad 7.0 HD+ | (PMP3870C_DUO) Tablet PC
7
MultiPad or cause loss of your data.
3. When you are reading the file from micro SD card, please don’t remove it, or the device could fail to
operate correctly.
2.3 Hot plug of storage card
Please do not hot plug the storage card when using or browsing its files.
For example, when you are running the Music/Video Player/ Gallery, the storage card could be damaged
and files on it might become corrupt if you take out the storage card without proper preparation. As for
details of inserting/removing storage card, see 2.2 Use the storage card.
2.4 Memory space
The capacity of built-in flash chip is 8 GB. The device contains 2 memory partitions: Internal storage
& NAND Flash storage. The space is partitioned to store apps, setting and user data. A part of storage will
be reserved for system resources and wouldn’t be available for user. The exact size of available memory
may vary depending on Firmware version.
MultiPad supports extended storage – micro SD cards of 32GB maximum capacity.
2.5 Power on/off and Device Reset
1. Power on: To turn on the device, press and hold the Power Button until you see the start-up screen
then release. It will automatically enter the Home screen. If it is first time to use it, it will enter Prestigio
Wizard screen. Please follow the on-screen instructions
2. Power off: Press and hold the Power Button, and then tap on OK to power off the device.
3. Screen Lock：short-press down the Power Button once to shut down the screen to save battery life.
Short-press down the Power Button again to activate the lock screen. After unlocking, the device will
resume the screen before locking.
4. Reset: Press the power button for about 8 seconds to perform forced reset of device.