User's Manual

USER MANUAL | MultiPad 7.0 ULTRA DUO | (PMP5870C_DUO)

2.3 Hot plug of storage card

Please do not hot plug the storage card when using or browsing its files.

For example, when you are running the Music/Video Player/ Gallery, the storage card could be damaged

and files on it might become corrupt if you take out the storage card without proper preparation. As for

details of inserting/removing storage card, see 2.2 Use the storage card.

2.4 Memory space

The capacity of built-in flash chip is 8GB. The device contains 2 memory partitions: Internal storage &

NAND Flash storage. The space is partitioned to store apps, setting and user data. A part of storage will

be reserved for system resources and wouldn’t be available for user. The exact size of available memory

may vary depending on Firmware version.

MultiPad supports extended storage – micro SD cards of 32GB maximum capacity.

2.5 Power on/off and Device Reset

1. Power on: To turn on the device, press and hold the Power Button until you see the start-up screen

then release. It will automatically enter the Home screen.

2. Power off: Press and hold the Power Button, and then tap on OK to power off the device. Press and

hold the Power Button for about 6s, it will power off directly.

3. Screen Lock：short-press down the Power Button once to shut down the screen to save battery life.

Short-press down the Power Button again to activate the lock screen. After unlocking, the device will

resume the screen before locking.

4. Reset: Press and hold the Power Button for about 6s, it will power off directly.

2.6 Startup Wizard

Prestigio Startup Wizard will guide you through the initial setup of your MultiPad. It appears at first

start and consists of several steps. Following information will help you to avoid issues during that stage.

Welcome! Screen allows you to choose the desired language of the operational system of Prestigio

MultiPad. Tap “Change language” button to access a list of available languages. You can select the

language you need in this list, than you’ll return back to the Welcome screen. Tap Next, read and accept

End User License agreement to continue.

Please, note that in case you refuse to accept EULA (Dismiss button) you won’t be able to proceed with

device activation.