Operation Manual

2
2. Getting Started
2.1 Charge the battery
Prestigio MultiPad comes with a built-in polymer rechargeable battery and is designed to
use only manufacture-specified original batteries and accessories. You can see battery status on
status bar of MultiPad in the lower right corner of the home screen. Android OS has battery
charge detection system and notify user if battery charge is low and device need to be connected
to AC adapter. If you will see such message, or your device couldn’t power on, connect original
AC power adapter to charge your device. Plug one end of the adapter into the power jack of the
device, and the other to the power socket. To extend the battery operation life, wait for finish of
charge process.
Please, fully charge your new device after unpacking.
2.2 Use the storage card
Your new Prestigio MultiPad 9.7 ULTRA Tablet PC is equipped with Micro SD card slot to
extend available device memory. It is compatible with Micro SD/ Micro SDHC/ TF-Flash card
formats up to 32Gb. Proper functioning of larger capacity cards is not guaranteed.
Insert the storage card
The storage card slot is on the right panel of device. To insert a card, place the card
connector towards the rear side of the device and the printing side of the card towards the front
side of the device and press it in card slot until click. Card must be inserted effortlessly. DO NOT
push the card too strong, it could damage the card slot or storage card.
Browse files in the storage card
To browser the files in the storage card, do one of the following:
● Select “File” icon to view files in the storage card;
● You can also install and run any other third party file browser applications.
Remove the storage card
To remove the storage card, gently press the edge of the card to release the safety lock and
pull the card out of the slot.
To avoid data loss or damage, please stop using files/programs in the storage card, and then
tap Settings> Storage> Unmount SD card to remove it safely.
[Note]:
1. Make sure the location and direction of the storage card is correct when inserting.
2. To avoid incompatibility of the storage card, major brands of storage card are
recommended.