Quick Start Guide Prestigio Roadrunner 300 EN 1. Packing List 1. Prestigio car DVR 2. Suction mount 3. Car charger 4. USB cable 5. Rechargeable battery 6. Quick start guide 2.
Quick Start Guide Prestigio Roadrunner 300 EN Getting started 3. Power on/Power off z Position the device in the vehicle using the suction mount and press the Power button to turn it on. To power off the device press the button again. z You can also connect the device to the car charger. It will automatically turn on and start recording when the car engine starts. When the engine stops, the device will automatically save the last file and turn off. 4.
Quick Start Guide Prestigio Roadrunner 300 EN recognize it as default storage and all the data will be saved on this card. 6. Recording z Connect the device to car charger, when the car engine is turned on after 5 seconds, the device will start loop video recording. When the car engine stops, the device will save the last file and turn off after 15 seconds Notice: 1. Press OK button on loop video recording, the current file will be saved and the device enters to standby mode. 2.
Quick Start Guide Prestigio Roadrunner 300 EN Turn on the device and make sure the Video mode is selected. Note: To select Video or Picture Mode press the Mode button. The appropriate symbol will be displayed in the top left corner of the screen. z Press Menu button to enter Settings. Press up/down button to select the option and press OK button to enter the select mode, press up/down button to select and press OK again to set the value.
Quick Start Guide Prestigio Roadrunner 300 EN button to select Settings. The following settings are available: z Format: Select to format the Micro SD Card. z Language: Select the desired language from the list. z Auto off: Make the device automatic power off when it is not in use. z LCD Auto Off: Select the time of the LCD automatic turn off when the device start recording. z Sys Reset: Select to restore default system settings.
Quick Start Guide Prestigio Roadrunner 300 EN 14. PC Camera Mode Connect the device to a computer via USB. It will show DV/PC Cam/Disk drive tarting up the device, Press up/down to select and then press OK to enter PC CAM mode, then you can use the device as a PC Camera 15. Playback on TV To playback the recorded files on TV connect the device to your TV with the HDMI cable (not included in the package) and follow the TV instructions or refer to your TV user manual.
Quick Start Guide Prestigio Roadrunner 300 EN malfunctions or data corruption and loss.
