Car Video Recorder RoadRunner 320 User Manual Version 1.0 www.prestigio.
About this user manual This user manual is specially designed to detail the device’s functions and features. -- Please read this manual before using the device to ensure safe and proper use. -- Descriptions are based on the device’s default settings. -- Prestigio continuously strives to improve its products. Due to software upgrading, some contents in this user manual may be different from your product.
Contents 1. Unboxing ������������������������������������������������������������������������������������������������������������������������� 1 Inside your package ����������������������������������������������������������������������������������������������������������������1 Device overview ����������������������������������������������������������������������������������������������������������������������1 2.
1.
2. Getting started Insert a microSD card Before starting video recording, please insert a microSD card (not included) into the slot until it locks in place. 2 The device will automatically recognize it as default storage and all the data will be saved on this card. Install the suction mount 1. Match the mounting slots of the device and the suction mount, and press the suction mount until it locks in place. 2.
3. Settings Before recording, you can set up the device according to your requirements. -- In video/picture preview mode, press [MENU] to enter video/picture settings, press it again to go to general settings, press it third time to exit. -- In setting list, use [ ]/[ ] to navigate the menu, press [OK] to confirm the selection, and [MENU] to exit. 3 Video settings • Resolution: Select the resolution of recorded video: 1080FHD / 1920x1080, 1080P/1440X1080, 720P / 1280x720, WVGA/848X480, VGA / 640x480.
• Default setting: Restore to default setting. • Version: Display the current system version. 4. Recording 4 Record a video Auto video recording Connect the device to car charger, when the car engine launches, the device will automatically turn on and start loop video recording. When shut off the car engine, the device will save the last file and turn off. Manual video recording In preview mode, press [REC] button to start and stop video recording.
6. Playback 6 Play video on DVR 1. 2. 3. 4. In playback mode, press [ ]/[ ] to scroll through the files. Press [OK] to start playback. Press [ ]/[ ] to slow down or speed up playing. Press [MODE] again to exit playback mode. Playback on PC Remove memory card from DVR and insert it into computer’s card reader. DVR’s USB port is for charging purpose only. 7. Specifications 7 Display Processor Image sensor View angle 2.0", 480 x 240 pixels NTK96220 1.0 MP, CMOS I 1/4" 90° 1920x1080p (25 fps) 11.