Car Video Recorder RoadRunner 400GPS, 410GPS User Manual Version 2.0 www.prestigio.
About this user manual This user manual is specially designed to detail the device’s functions and features. - Please read this manual before using the device to ensure safe and proper use. - Descriptions are based on the device’s default settings. - Prestigio continuously strives to improve its products. Due to software upgrading, some contents in this user manual may be different from your product. Prestigio reserves the rights to revise this user manual or withdraw it at any time without prior notice.
Contents 1. Unboxing ................................................................................................................. 1 Inside your package ........................................................................................................................... 1 Device overview ................................................................................................................................... 1 2. Getting started............................................................
• Car video recorder • Mount • Car charger • Quick start guide Device overview 4User Manual | RoadRunner 400-410GPS 1
2. Getting started Insert a microSD card Before starting video recording, please insert a microSD card (not included) into the slot until it locks in place. The device will automatically recognize it as default storage and all the data will be saved on this card. Mount to Windshield 1. Attach the bracket to the device. Slide and push until the connection is firm. 2. With the suction-cup laying flat, position the suction-cup on the windshield. 3.
3. Settings Before recording, you can set up the device according to your requirements. - In preview mode, press [MENU] to enter settings, then pressing [MODE] one can to go to MOVIE settings, PICTURE settings, PLAYBACK mode, SD tool, General settings and Edog settings, press [MENU] to exit. - In setting list, use [▲]/[▼] to navigate the menu, press [OK] to get the options and confirm the selection.
GENERAL SETTINGS Date/Time: Set date and time on device. Beep Sound: Off/On. Turn off/on beep sound. Stamp Date: Off/On. Add date stamp onto videos. Stamp Time: Off/On. Add time stamp onto videos. Language: Choose your language. Frequency: 50Hz, 60Hz. For a given luminance, the frequency of light fluctuation that evokes a sensation of flicker. Set a right flickering frequency to avoid horizontal stripe interference. Shutdown backlight: Adjust the backlight time Off/30 seconds/1 Minute/3 Minutes.
4. Recording Record a video Auto video recording Connect the device to car charger, when the car engine launches, the device will automatically turn on and start loop video recording. When shut off the car engine, the device will save the last file and turn off. Manual video recording In video preview mode, press [OK] button to start and stop video recording. Record the sound In preview mode or recording mode, press [▼] to turn on or off the microphone.
6. Playback Play video on DVR 1. 2. 3. 4. 6 In playback mode, press [▲]/[▼] to scroll through the files. Press [OK] to start/Pause playback. Press [OK] again to stop playing. Press [MENU] again to exit playback mode. Playback on PC Remove memory card from DVR and insert it into computer’s card reader. DVR’s USB port is for charging purpose only.
7. Specifications Display 2.