RoadRunner 700X PCDVRR700X Portable Car Video Recorder User Manual Version 1.0 www.prestigio.
About this user manual This user manual is specially designed to detail the device’s functions and features. -- Please read this manual before using the device to ensure safe and proper use. -- Descriptions are based on the device’s default settings. -- Prestigio continuously strives to improve its products. Due to software upgrading, some contents in this user manual may be different from your product.
Contents 1.
1.
Your DVR at a glance LCD segment screen Power switch Record button Recording indicator Capture button VOX switch Working/charging indicator Microphone TFT display screen Menu button Up button Buzzer Micro SD card slot Right button Left button OK button Mini USB port Push to remove screen Lanyard hole Down button Recall button Laser trasmitter Video recording/ shooting indicator AV output port Camera lens HDMI port Thread interface Buttons Button Specification Power switch • Slide to ON to pow
Remote control Record Capture Stop Pair the remote control with your DVR 1. Power off your DVR. 2. Press and hold the Record button on your DVR. 3. Slide the Power switch on your DVR to ON. 4. Release the Record button on your DVR. 5. Press and hold the Record and Stop button on the remote control. 6. After you hearing two beep, the remote control is paired with your DVR. Use the Remote control -- Press Record button to start recording. -- Press Stop button to stop recording.
2. Getting started 2 Congratulations on your purchase and welcome to Prestigio. To get the most of your product and enjoy all Prestigio has to offer, please access: http://www.prestigio.com/catalogue/DVRs More details about your product, please access: http://www.prestigio.com/support Please read the "12. Safety precautions" on page 19 before use. Insert a memory card You need to insert a memory card before video recording and taking photos.
• Be careful not to damage your fingernails when you remove the back cover. • Do not bend or twist the back cover excessively. Doing so may damage the cover. 2. Insert the battery (with its exposed copper contacts first) into the battery compartment. Please use only original batteries that came in the box or replacements that we recommend (Lithium battery PLB700). Replace the cover 1. Align the cover onto the part of your DVR. 2. Push the back cover against your DVR to lock the cover into place.
Use the waterproof case For the waterproof case, the waterproof depth is up to 60 meters and the waterproof grade is IP68. 1. Remove the display screen from your DVR. 2. Put your DVR to the waterproof case. 3. Push to lock the cover of the waterproof case into place. You will hear a click when the cover of the waterproof case is locked in place. Remove the DVR from the waterproof case 1. Open the cover of the waterproof case. 2. Remove the DVR form the waterproof case.
For flat surfaces You need the following accessories to mount your DVR for a flat surface. • Prestigio DVR • Accessory for flat installation • Waterproof case if necessary • Bracket if necessary For outdoor sports You need the following accessories to mount your DVR for a bicycle use. • Prestigio DVR • Bicycle bracket • Waterproof case • Accessory for flat installation • Waterproof case if necessary • Bracket if necessary Be careful not to damage your fingernails when you mounting your DVR.
3. Basics Charge the battery A new battery is partially charged. Do the following to charge the battery: 3 Use the adapter 1. P lug the small end of the charger into the USB port of the device, and plug the large end to the adapter. 2. Plug the adapter into an electric socket 3. After fully charging, disconnect the device from the charger. First unplug the charger from the device, and then unplug it from the electric socket. Use the car charger 1.
Connect to your TV or Monitor Your car DVR’s HDMI cable lets you watch the videos and view photos on your TV. • Connect your DVR to the TV by using the supplied HDMI cable. • Connect your DVR to the TV by using the supplied AV cable. Status icons on the segment screen The icons in the status bar on the segment screen give information about your DVR: Icons What it means The video recording mode is activated. The DVR is capturing a photo. The voice recording mode is activated. The DVR is powerd on.
4. Video record With your DVR, you can record high-quality videos, which can be the evidence when the accident happens. 4 Please confirm that there is a memory card connected before video recording. Camcorder settings Before recording videos, customise your camcorder settings. 1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes to preview mode at this time. 2. Press [M] to enter settings. 3. Press [<] or [>] to select Camcorder.
5. Photo capture With your DVR, you can capture photos in burst, which can be the evidence when the accident happens. 5 Please confirm that there is a memory card connected before photo capturing. Camera settings Before capturing photos, customise your DVR settings. 1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes to preview mode at this time. 2. Press [M] to enter settings. 3. Press [<] or [>] to select Camera. The following options are available.
6. Vioce Record Please confirm that there is a memory card connected before vioice recording. 6 Record voice 1. S lide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes to preview mode at this time. 2. Press [M] to enter settings. 3. Press [<] or [>] to select Camcorder. 4. Use the [+] or [-] button to select Capture Mode. 5. Press [OK] and then press [<] or [>] to choose voice recording " " 6. Press [OK] to confirm your selection. 7.
7. Multimedia You can watch the videos and view the photos taken by the DVR. You need to connect the Segment screeen to your DVR to watch the videos and view the photos. 7 Watch a video 1. S lide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes to preview mode at this time. 2. Press [ ] to enter playback mode. 3. Use the [+] or [-] button to select Record. 4. Press [<] or [>] to scroll among the files. 5. Press [OK] to start or stop playing the selected video. 6.
8. File management Delete a file 1. S lide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes to preview mode at this time. 2. Press [ ] to enter playback mode. 3. Use the [+] or [-] button to select Record or Capture. 4. Press [<] or [>] to scroll among the files. 5. Press [M] and then use [<] or [>] to select Delete one. 6. Use the [+] or [-] button to select . 7. Press [OK] to delete the selected file. 8 Delete all files 1.
About DPOF DPOF (Digital Print Order Format) is a standard to record the print orders sent to the Micro SD card. You can dedignate the photos to be printed and the number of their copies. After you set DPOF to the photos, you just need to insert the Micro SD card into a DPOF compatible printer to output the photos as ordered. The printer compatible with your camera can follow the DPOF orders to print the photos. • The DPOF printing requires a Micro SD card with preset DPOF information.
9. Settings 9 Set up your DVR Follow the steps to finish settings: 1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes to preview mode at this time. 2. Press [M] to enter settings. 3. Press [<] or [>] to select Settings. 4. Use the [+] or [-] button to select the desired option. 5. Press [OK] if your want to set the desired item. 6. Select the parameter by pressing [<] or [>]. 7. Press [OK] to confirm your selection. 8.
10. Specifications 10 Item Specification Viewing angles Sensor size Recording resolution 170° 5.0 Mega CMOS sensor (2592*1944) 1080P(1920x1080/30fps) 720P/60(1280x720/60fps) 720P/30(1280x720/30fps) WVGA(848x480P) MOV JPG 1000mAh Lithium Battery 350mA@ 3.7V (MAX) About 2.
11. Troubleshooting The device does not switch on Charge the device immediatelly. Unplug the charger and try to switch the device on. 11 Your device seems to over heat You might be using a charger that was not intended for use with your device. Make sure you always use the authentic accessory shipped with your device. The picture captured with the device is not clear Make sure that the camera lens on both sides is clean.
12. Safety precautions Please observe all safety precautions before using your DVR. Please follow all procedures outlined in this user manual to correctly operate the device. • Do not attempt to open the shell or attempt to repair, if the device or any parts are defective, please go to the professional maintenance point for repairing. 12 • To avoid risk of electrical shock, do not connect or disconnect the device with wet hands.
Cautions in using anti-slide pad -- For maximum contact effectiveness, please make sure the surface and accessory is clean and smooth before affixing anti-slide pad on the surface. As the Prestigio products are constantly updated and improved, your device’s software and hardware may have a slightly different appearance or modified functionality than presented in this User manual.
