RoadRunner 710X PCDVRR710X Portable Car Video Recorder User Manual Version 1.0 www.prestigio.
About this user manual This user manual is specially designed to detail the device’s functions and features. -- Please read this manual before using the device to ensure safe and proper use. -- Descriptions are based on the device’s default settings. -- Prestigio continuously strives to improve its products. Due to software upgrading, some contents in this user manual may be different from your product.
Contents 1.
1.
Your DVR at a glance Camera lens Laser indicator Switcher USB port Reset hole Resolution indicator Mode indicator Power indicator Micro SD card slot R button/Select button Mode button HDMI port Buttons Button Definition Specification [ Power • Slide the switcher to [ ] to power on your DVR. • slide and hold the switcher to [ ] to power off your DVR. Camera • Slide the switcher to [ ] to take a photo. • Slide the switcher to [ ] to confirm the selection while connecting your DVR to the TV.
2. Getting started Congratulations on your purchase and welcome to Prestigio. To get the most of your product and enjoy all Prestigio has to offer, please access: http://www.prestigio.com/catalogue/DVRs 2 More details about your product, please access: http://www.prestigio.com/support Please read the 9. Safety precautions on page 12 before use. Mount your DVR Follow the steps below to mount your DVR. Remember to power off your DVR before mounting it.
Be careful not to damage your fingernails when you mounting your DVR. Insert a memory card You need to insert a memory card before video recording and taking photos. Depending on the memory card manufacturer and type, some memory cards may not be compatible with your device. 1. Unscrew the cover of your DVR. 2. Insert a memory card with the gold-coloured contacts facing downwards. 3. Push the memory card into the slot until it locks in place.
3. Basics Charge the battery A new battery is partially charged. Do the following to charge the battery: 3 Use the adapter 1. P lug the small end of the charger into the USB port of the device, and plug the large end to the adapter. 2. Plug the adapter into an electric socket 3. After fully charging, disconnect the device from the charger. First unplug the charger from the device, and then unplug it from the electric socket. Use the car charger 1.
4. Settings You can set up your DVR before record videos and capture photos in burst. To finish this operation, you need to connect your DVR to the TV. 4 Connect to your TV 1. Connect your DVR to the TV by using the supplied HDMI cable. 2. Switch your TV to HDMI mode. 3. Slide the switcher to [ ] to power on your DVR. Your DVR is in preview mode now. 4. While connecting to your TV, use the following buttons to control playback: -- Press [M] to switch among MOVIE, PHOTO, REC and SETUP modes.
Set up options The following settings are available: Options Language Record overwrite Record file size Size Date time stamp Format Time setup Default setting Night mode Flicker Firmware version What it means Select a language displayed on the TV. Once there is no more free space left on the Micro SD card the device will automatically erase the oldest files on the card and continue recording new ones. Select the video clip time. Set the resolution of photos.
5. Video record and photo capture 5 With your DVR, you can record high-quality videos and capture photos in burst, which can be the evidence when the accident happens. Please confirm that there is a Micro SD card connected before video recording. Record videos 1. S lide the switcher to [ ] to power on your DVR. You will hear a buzzer beep for 5 times and the laser indicator light on at the same time. 2. Press [R] to choose the recording resolution.
6. Multimedia You can watch the videos and view the photos taken by the DVR. You need to connect your DVR to the TV to watch the videos and view the photos. 6 Connect to your TV Your DVR’s HDMI cable lets you watch the videos and view photos on your TV. 1. Connect your DVR to the TV by using the supplied HDMI cable. 2. Switch your TV to HDMI mode. 3. Slide the switcher to [ ] to power on your DVR. Your DVR is in preview mode now. 4.
7.
8. Troubleshooting The device does not switch on Charge the device immediatelly. Unplug the charger and try to switch the device on. 8 Your device seems to over heat You might be using a charger that was not intended for use with your device. Make sure you always use the authentic accessory shipped with your device. The picture captured with the device is not clear Make sure that the camera lens on both sides is clean.
9. Safety precautions Please observe all safety precautions before using your DVR. Please follow all procedures outlined in this user manual to correctly operate the device. 9 • Do not attempt to open the shell or attempt to repair, if the device or any parts are defective, please go to the professional maintenance point for repairing. • To avoid risk of electrical shock, do not connect or disconnect the device with wet hands.
