Instructions / Assembly

2
IMPORTANT SAFETY INFORMATION
Connect the power supply cord to a polarized outlet only. As a safety feature, this appliance has a polarized plug (one
blade is wider than the other). This plug will only fit in a polarized outlet one way. If the plug does not fit fully in the out-
let, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Getting Acquainted
Before using your electric slicer/shredder, study the diagram on page 3 to become familiar with the various parts of
the unit and read the instructions carefully.
Before initial use, and after each subsequent use, wash all parts except the motorized base in warm, sudsy water. Wipe
the motorized base with a damp cloth to clean. Never immerse the motorized base in water or any other liquid.
How To Use Your Slicer/Shredder
1. Select the slicing or shredding cone and insert it, narrow end first, into the slic-
ing/shredding chute (Fig. A). Then attach the twist-lock ring by turning clock-
wise until it locks into place (Fig. B). The metal portions of the slicing and
shredding cones are sharp. Handle with care.
2. Attach the food chamber assembly to the motorized base. With the food chamber
assembly held at an angle, fully insert the driving end of the assembly into the
socket of the motorized base (Fig. C). Next, while pushing the food chamber
assembly firmly in towards the handle, rotate the assembly clockwise until it is
upright and it is centered with the handle.
Check to be sure that the interlock bracket on the food chamber assembly
(Fig. D) has been fully captured in the bracket slot located at the front of
the motorized base (Fig. E). If it is not captured, the unit may not operate
and the food chamber assembly will fall off the base.
Slicing/shredding
chute
Food
chamber
Slicer/shredder
power switch
Shredding
cone
Motorized
base
Bracket slot
Driving
end
Food
guide
Slicing
cone
Interlock
bracket
Twist-lock ring
ON-OFF
latch
Driving
end
Slicing/
shredding chute
Fig. A
Fig. B
Food
chamber
assembly
Twist-
lock ring
Food
chamber
assembly