Instructions / Assembly

How To Use
Before initial use, and after each subsequent use, wash appliance in dishwasher or in warm
sudsy water, rinse, and dry. Do not immerse heat control or magnetic cord assembly
in water or let them come in contact with any liquid. Prior to first use, “season” the
multi-cooker’s cooking surface by rubbing lightly with cooking oil. Remove excess oil
with paper towel.
For best results use nylon, plastic, wooden, or rubber utensils to turn, stir, or remove food
when not using the steam/fry basket. The use of metal utensils is not recommended.
1. Place multi-cooker on a dry, level, heat resistant surface. The cover should not be
on the multi-cooker.
CAUTION: To avoid personal injury, position multi-cooker well back from edge of
counter or table. Do not let cord hang or drape over edge of counter or table within
reach of children.
2. Insert the probe end of the heat control into the multi-cooker so the two electrical
pins on the appliance are fully inserted into the heat control. Then attach the magnetic
cord assembly to the heat control by aligning the magnetic coupler end with the two
electrical pins located on the back of the heat control (Fig. E). Due to the fact that the
magnetic coupler end is polarized, it can only be attached to the heat control one way.
When properly aligned, the plug
will magnetically attach itself to
the heat control. Attach the cord so
that the printed patent information
on the magnetic plug is facing up.
The daisy and cautionary language
will be facing towards the counter.
If positioned upside down, it will
not attach.
Important: The magnetic cord
was designed to detach easily
from the multi-cooker. As a re-
sult, if it is bumped or touched
during use it could possibly
detach causing the unit to stop
heating. Avoid contact with cord
during operation. If contact oc-
curs, verify that the cord is still
properly connected.
3. Plug the multi-cooker into a 120v
AC electrical polarized outlet
only.
4. Using the index on page 6, determine the type of cooking method you will be follow-
ing and turn to the referenced page.
5. Preheat multi-cooker as indicated in the cooking method and follow the cooking in-
structions. During cooking, the pilot light will go on and off indicating temperature is
being maintained.
5
Control Master

heat control
To assure the continued accuracy of the Control
Master

heat control, avoid rough handling
during use and storage. Store the cord assembly
in a clean, dry location away from metal objects.
Always check the magnetic coupler end before use
to assure metal items have not become attached.
Probe
Pilot light
Heat selector
Magnetic cord
assembly
Heat
control
Magnetic
coupler end
Electrical
pins
Fig. E
72-743A_5Qt._KK_instr.indd 5 2/3/09 2:56:18 PM