User Manual

2
Important Cord and Plug Information
Thisappliancehasapolarizedplug(onebladeiswiderthantheother).Toreducetheriskofelectricshock,thisplugisintendedtot
intoapolarizedoutletonlyoneway.Iftheplugdoesnottfullyintotheoutlet,reversetheplug.Ifitstilldoesnott,contactaqualied
electrician.
Do not attempt to modify the plug in any way. A short power supply cord is provided to reduce the risk resulting from becoming entangled
in or tripping over a longer cord. DO NOT USE WITH AN EXTENSION CORD.
Do not allow the cord to run underneath or around the appliance. The magnetic cord may not detach easily if the cord is positioned in
this fashion. Connect the power supply cord to a 120VAC electrical outlet only.
How to Attach Legs and Handles
Tools Required: Phillips screwdriver
Parts Included: 4 Legs, 2 Handles
To Attach Legs to Base
1. Place the multi-cooker upside down on the table or counter.
2. Using the screwdriver, remove the screws from the four mounting projections on the bottom of the multi-cooker and set aside. Use
these screws to attach the legs to the base.
3. Position one of the legs, rubber foot facing up, over one of the mounting projections (Fig. A). Align the hole in the leg with the hole
in the mounting projection and fasten securely with the screw. The leg should not rock or move if twisted.
NOTICE: Continuing to tighten, once secure, can result in the stripping of screws or the cracking of legs.
4. Repeat step 3 for other three legs.
5. Turn the multi-cooker right side up on the table or counter. When properly assembled, the multi-cooker should sit level with no leg rock.
To Attach Handles to Base
1. Place the multi-cooker upside down on table or counter.
2. Using the screwdriver, remove the screws from the tabs on each side of the base and set aside. Use these screws to attach the handles
to the base. HINT: When removing the screw under the plug guard, hold the screwdriver at a slight angle or use a short screwdriver
or a screwdriver with a long shank.
3. Slide one of the handles, with the screw hole up, onto the tab so the hole on the tab aligns with the hole on the handle (Fig. A). Fasten
securely with the screw. The handle should not wobble, but slight movement from side to side is normal.
NOTICE: Continuing to tighten, once secure, can result in the stripping of screws or the cracking of handles.
4. Repeat step 3 for the other handle.
5. Turn the multi-cooker right side up on the table or counter. When properly
installed, the handles should be parallel with the table or counter.
To Attach Basket Handle
1. Slide lock bar up on handle (Fig. B) and place one of the handle bars into one
ofthetabsonthebracket.Thensqueezethehandlebarstogetherandtthe
other handle bar into the opposite tab on bracket.
2. After attaching handle to basket, make sure to slide the lock bar down
(Fig. C) to the locked position to insure against accidental detachment of the
handle from the basket.
Before First Use
This versatile electric multi-cooker braises, steams, boils,
deep fries, and more. It is also great for making soups,
stews, and desserts. Before using the multi-cooker for the
rsttime,becomefamiliarwithitsvariousparts(Fig.D,
page 3), read the instructions carefully, and wash it ac-
cording to the Care and Cleaning instructions on page 4.
NOTICE: This appliance is not intended to melt wax, gels,
plastics, or other materials for making candles or for other
Leg
Mounting
projection
Rubber
foot
Handle
Tab
Screw
hole
Screw
Fig. A
Plug
guard
Lock bar
Lock bar
Fig. C
Fig. B
Tab
Handle bar