User's Manual

Table of Contents
1. Description
2. Operation
3. Specifications
4. FCC Statement
1.0 Description
The Radio Micro Force Module adds wireless operation to either the analog Micro Force
V+F2 or Digital Micro Force controls. It can be used to control the zoom channel of an
MDR2, wireless V+F Lens Control, or Radio Dimmer.
The module is attached to the Micro Force control with an articulating bracket and
attachment knob (15). The adjustment knob ( 9 ) allows the user to change the viewing
angle. A short cable (16) connects the Micro Force control to the Radio Micro Force
module.
A Li-Ion Battery (14) powers both the Radio module as well as the Micro Force control.
To remove the battery, press the Battery Release (7) towards the rear of the module
while pushing the battery downwards.
The omni-directional antenna element (1) is housed within a rugged cover that protects
it against impact. The tri-color LED indicates the strength of the received signals:
Blue – Maximum
Green – Strong
Red – Minimum
(off) – Signal Strength too low.
Move closer to MDR2 for reliable operation.
There are 30 wireless channels available numbered from 0 – 29. These correspond to
the channels on the MDR2, V+F Lens Control and Radio Dimmer. The channel is raised or
lowered by pressing the pair of buttons (10) to the right of the channel indicator (6).