User's Manual

20
(2) This device must accept any interference received including interference that may cause
undesired operation.
FCC RF EXPOSURE STATEMENT
To satisfy RF exposure requirements, this device and its antenna must operate with a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
B. Connector pin-outs
1. Hand Unit Connectors
2
. MDR Connectors
Command Serial Zoom Remote Iris
5-pin Lemo 4-pin Lemo 6-pin Lemo 3-pin Lemo
1. GND 1. +12V 1. + PWR 1.+Pot
2. +12 – 24 VDC 2. GND 2. Gnd 2. Wiper
3. Serial
3. Serial In
3. Run
3.GND
4. Serial 4. Serial Out 4. Run momentary
5. n/c 5. Vref
6. Zoom Cmd
Command Serial Power Motor
1. Gnd 1. +12V 1. Gnd 1. Motor (+)
2. +24V 2. GND 2. +24V 2. Motor (-)
3. Serial
3. Serial In
3. +12V
3. Encoder A
4. Serial 4. Serial Out n/c 4. +5V
5. Playback trigger
Bloop Light Trigger
5. GND
6. Encoder B
7. Motor ID
Camera
1. GND
2. Ext. Control
3. Run (30mA max)
4. Run
5. Momentary Run
6. Clock Out +5V
7. Clock Out +12V
8. Camera Encoder In
9. RS232 out
10. RS232 In
11. Zoom Ref In
12. Zoom Command out