User's Manual

5
To turn off the power to the unit, press the Power Switch for 3 seconds.
c. If the ft and fps text appear in the upper right corner of the display, the HU3 and
MDR are both set to the same wireless channel. If the wireless channels of the HU3
and MDR do not match, the message No Host! will appear in the upper left corner of
the display replacing the ft and fps text.
d. Match the HU3 wireless channel to the MDR:
• Press the Menu soft key. “Channel” will be highlighted. Use the Nav key to move
the selection to the right. Change the channel number with the Nav key to match
the setting of the MDR.
• The Signal Strength bars will appear. To return to the main menu, press the Nav
key left.
e. To use a blank focus marking ring, turn off the
Focus mapping
:
 Press the Menu key.
 Select Lens.
 If the name of a lens appears to the right of “Lens”, press Fmap OFF.
 The HU3 is now ready for basic operation. The blank focus marking ring,
and iris marking strip can be used to mark lens calibrations.
f. Focus mapping eliminates the need to manually mark separate rings for each lens.
Data from the lens library is matched to pre-printed focus marking rings. This makes
process of lens changing quick and efficient. A detailed description of this function
showing the display screens is given in section III. To calibrate the focus marking
ring to a lens in the library:
• Press the Menu key.
• Use the Nav key to select Lens.
• Press Choose.
• Select the lens location (All lenses, My List A…..)
• Select the lens and press OK or the Enter key (the center of the Nav key).
• Set the lens to infinity (as directed) and Enter.
• Return to the Lens selection in the Menu.
• Press Ring and choose a focus ring with the desired near focus.
• Install the same focus ring on the focus knob.
Menu Screen: Channel Selection