User's Manual

8
B. Set-Up and Operation
1. Main Display Screen. Press the Power Switch momentarily. The OLED display will
show the Main Display Screen :
2. Menu Screen Options. Press the MENU soft-key; the MENU screen appears:
3. Select a radio Channel to match that of the Motor Drive:
Press the right side of the NAV key to highlight the Channel number. Change to the
desired channel by pressing the top and bottom pads of the Nav key. The antenna icon
and bars indicate the presence and signal strength of MDR2 units on that channel.
4. To reset the Footage counter use the Nav key to highlight Footage, and press Clear.
Units are changed with the ft/m soft key. Change the movement type by pressing the
right side of the Nav key; 4, 3, and 2 perforation pull down are supported.
Main Display Screen
Shows focus distance
in digital format
(Lens must be calibrated)
Shows focus knob
setting as bargraph
All functions are accessed through
the Menu key
Focus Ring Letter footage
Radio Channel
Signal Strength bars
Battery Charge
Lens Selection
Menu Screen: Channel Selection
Footage Counter menu Movement Selection