User's Manual

To calibrate the lens press Edit (Fig 6.12). Select Calibrate Focus with the Nav key (Fig

6.13), and press OK or ENTER).

After the lens focus ring is set to infinity (FIG 6.14), the display indicates the first of ten

calibration distances (FIG 6.15). There are two versions of this display screen, one for

lenses with linear focus mechanisms, and a second for lenses with non-linear focus.

Choosing a lens type automatically brings up the corresponding display screen.

The display screen for lenses with linear focus mechanisms allow the user to scroll up and

down with the Nav key (FIG 6.15, and 6.16).

The display screens for non-linear lenses show fixed distances for each calibration point

as shown in Fig. 6.18 – 6.20.

After the tenth point is entered (Fig. 6.17, 6.20), the lens description is shown to the right

of the Lens entry of the Menu (Fig. 6.21). The letter “F” to the right of the lens description

indicates that the lens focus has been calibrated. The main screen (Fig. 6.22) shows the

lens information.

Fig 6.15 Fig 6.16 Fig 6.17

Fig 6.18 Fig 6.19 Fig 6.20

Fig 6.13 Fig 6.14

Fig.

6.21

Fig. 6.22

Fig. 6.23