User's Manual

A. Digital Motor Brackets.

The integral bracket (“A” version) provides for simplified mounting and also allows the

motors to be positioned very close to one another. A rosette gear securely locks the swing

arm in position. See pictures on previous page.

Important tip for integral brackets: to prevent the motor position from changing as the

handles are tightened, first tighten the handle which clamps the motor to the rod and then

tighten the rosette handle.

Swing Arm Brackets pictured below have a 19mm opening on one end and a 15mm opening

of the other. Step-down bushings accommodate 15mm and 0.635” rods, p/n 4320 and p/n

4321 respectively.

Bracket p/n Distance between holes Use

4310 2.2” PV top rod bracket

4334 1.6” Clamps to PV Long Rod Support bracket

4302 1.8” PV bottom rod bracket

4301 3.7” Arri, Red, general purpose

4333 4.4” Arri, Moviecam, general purpose

4301 4333

Long Brackets for Horizontal

Matte Box Rods

4310 4334 4302

Short Brackets for Panavision

Vertical Matte Box Rods