User's Manual

III. Hand Unit 3. Detailed Description

A. Grip Configurations.

1. The Hand Unit can be set-up with a molded Hand Grip for Focus and Iris control or with

the Hand Grip replaced by a flat cover to accommodate a bracket and Micro Force zoom

control.

2. Removing the Hand Grip. The Handgrip is removed to allow the bracket for the Micro

Force to be installed.

· Press the Grip Release toward the HU3 housing (1).

· Slide the Grip downward (2)

· Replace the Grip with the cover (3).

· Install the Micro Force bracket using the threaded hole at the rear of the

HU3.

HU3 with Hand Grip

and Quick Release Plate

HU3 with Micro Force

and bracket 4336

(1)

(2)

(3)