User's Manual

9
B. Set-Up and Operation
1. Main Display Screen. Press the Power Switch momentarily. The OLED display will
show the Main Display Screen :
2. Menu Screen Options. Press the MENU soft-key; the MENU screen appears.
3. Select a radio Channel to match that of the Motor Driver:
Press the right side of the NAV key to highlight the Channel number. Change to the
desired channel by pressing the top and bottom pads of the Nav key. The antenna icon
and bars indicate the presence and signal strength of MDR2 units on that channel.
4. Selecting Lens with the Nav key (Fig. 6.1) allows lenses to be calibrated and their data
to be stored in the on-board library. The Focus Mapping software matches the witness
marks of calibrated lenses to the printed scales on the lens rings. The Ring key (Fig
6.1) is used to match the installed focus ring letter (A E).
Main Display Screen
Menu Screen: Channel
Selection
Lens Selection
Shows focus distance
in digital format
(Lens must be calibrated)
All functions are accessed through
the Menu key
Host MDR
Radio Channel
Signal Strength bars
Battery Charge
Fig 6.1
Fig 6.2
Fig 6.3