3UH[LVR $* (XURSDVWUDVVH &+ *ODWWEUXJJ ZZZ SUH[LVR FRP
Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Switching ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Clear - - - - - - - - - - - - - - - -
EN Instrument Set-up Overview Display The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them.
Operations Switching ON/OFF EN Clear ON i 2 sec Device is turned OFF. If no key is pressed for 180 sec, the device switches off automatically. Message Codes If the message InFo appears with a number, observe the instructions in "Message Codes" section. Example: Undo last action. Adjusting measuring reference 1 2 Distance is measured from the rear of the device (standard setting). Distance is measured from the front of the device.
EN Measuring Functions Measuring single distance 1 2 i 3 Target surfaces: Measuring errors can occur when measuring to colourless liquids, glass, styrofoam or semi-permeable surfaces or when aiming at hight gloss surfaces. Against dark surfaces the measuring time increases. 8.532 m 8.532 m Aim active laser at target. Permanent measuring 2 sec 1 The last value measured is displayed. 2 8.532 m Aim active laser at target. 3 Stops permanent measuring. Add / Subtract 2x 1 2 7.
Measuring Functions Area 1 2 EN 3 4 Aim laser at first target point. i 5 24.352 m Aim laser at second target point. The result is shown in the main line and the measured distance above. 2 Volume 2x 1 2 3 Aim laser at first target point. i 7 78.694 m 4 5 Aim laser at second target point. 6 Aim laser at third target point. The result is shown in the main line and the measured distance above.
EN Measuring Functions Pythagoras (2-point) 3x 1 2 3 4 Aim laser at upper point. i 5 The result is shown in the main line and the measured distance above. 8.294 m Aim laser rectangular at lower point. Pythagoras (3-point) 4x 1 2 3 Aim laser at upper point. 5 Aim laser at rectangular point. i 7 4 The result is shown in the main line and the measured distance above. 8.294 m 6 PREXISO P80 788508 6 Aim laser at lower point.
Measuring Functions Memory (last 10 values) EN 2 sec 1 2 8.294 m Last 10 values are displayed. 3 8.294 m Navigates back through last 10 values. PREXISO P80 788508 Value is ready to use for further calculations.
EN Technical Data General Range 0.05 to 80 m 0.16 to 262 ft Measuring accuracy* typ.: ± 1.5 mm ± 0.06 in Smallest unit displayed 1 mm 1/16 in Laser class 2 Laser type 635 nm, < 1 mW Protection class IP54 (dust- and splash water protected) Autom. power switch-off after 180 s Permanent measuring yes Addition/Subtraction yes Dimension (H x D x W) 117 x 57 x 32 mm 4.6 x 2.4 x 1.
Safety Instructions EN The person responsible for the instrument Permitted use must ensure that all users understand • Measuring distances these directions and adhere to them. Symbols used The symbols used have the following meanings: WARNING Indicates a potentially hazardous situation or an unintended use which, if not avoided, • will result in death or serious injury.
EN Safety Instructions Areas of responsibility FCC statement (applicable in U.S.) Laser classification Responsibilities of the manufacturer of the original equipment: Prexiso AG Europastrasse 27 CH-8152 Glattbrugg Internet: www.prexiso.com The company above is responsible for supplying the product, including the User Manual in a completely safe condition. The company above is not responsible for third party accessories.
Safety Instructions EN Labelling Laser Radiation Do not stare into the beam Laser class 2 acc. IEC 60825-1:2007 Maximum radiant power *: <1mW Emitted wavelength: 620-690nm Beam divergence 0.16 x 0.6 mrad Impulse duration 1 x 10 -9 s Subject to change (drawings, descriptions and technical data) without prior notice.
