Manual

VL6C+ ™ SPOT LUMINAIRE USER MANUAL 29
Soft Reset
A "soft reset" can be accomplished using the reset switch located in the yoke leg. During a soft reset, the lamp will not
be extinguished, eliminating the need to wait for the lamp to cool down before restriking.
To perform a soft reset:
Step 1. Remove board-side yoke leg cover (Figure 3-1).
Figure 3-1: Accessing the Reset Switch
Step 2. Press reset switch.
Step 3. Allow luminaire to execute reset and calibration procedure.
Step 4. Replace yoke leg cover.
Reset
Switch
Yoke Leg
Cover