User Manual 3.6 Instruction Manual

VX76 SOFTWARE USER MANUAL 181
Start
Start determines how the sequence steps will enter the effect.
+ Simultaneous (Simult) - All set parts assume some effect state upon effect recall (either a discrete instruction or
the background state).
+ Cascade - The set parts will start the sequence in a staggered entry. Part 1 will complete Step 1, then go to Step
2, while Part 2 begins Step 1, etc.
Continuous/Simultaneous Effect:
* For example purposes, actions are not necessarily complete sequences. An action merely represents what happens at
each stage of the effect whether it is a complete sequence or a portion of a sequence.
Action
Action determines how an effect will behave when loaded into a submaster.
+ Run - By default, the effect will load into the submaster in the Run state. In this case, the effect will automatically
begin running once it is loaded.
+ Stop - By default, the effect will load into the submaster in the Stop/Step state. Press [Stop/Step] to trigger
playback. (This can be useful if manual execution is required for an effect.)
Step 3Step 2Step 1
Part 2Part 3Part 1
Step 3Step 2Step 1
Part 3Part 1Part 2
Step 3Step 2Step 1
Part 1Part 2Part 3
Step 3Step 2Step 1
Part 1Part 2Part 3
Etc.
Action 1
Action 2
Action 3
Action 4
Action 5
*