Owner`s manual

Jazzy Select www.pridemobility.com 25
V. COMFORT ADJUSTMENTS
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 14.
2. Loosen the jam nut.
3. Turn the adjusting screw clockwise to raise the front of
the armrest, or turn the adjusting screw
counterclockwise to lower the front of the armrest.
4. Tighten the jam nut to lock the adjusting screw into
place.
Armrest Height Adjustment
To change the armrest height:
1. Loosen the two setscrews located on the armrest
receiver. See figure 14.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrews to secure the armrest.
Seatback Angle Adjustment
If your power chair is equipped with a limited-recline
seatback, you can adjust it to four (4) different angles: 90°,
102°, 105°, or 107°.
To adjust the seatback angle:
1. Remove the adjusting screws from each seat hinge. See
figure 14.
2. Set the seatback at the desired angle.
3. Reinstall the adjusting screws to each seat hinge and
tighten.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights
in 1/2-in. increments.
To raise or lower the foot platform:
1. Remove the fasteners from the foot platform bracket.
See figure 15.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the fasteners into the foot platform bracket and
tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the fasteners from the foot platform bracket.
See figure 15.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the fasteners into the foot platform bracket and
tighten.
ARMREST KNOB
JAM NUT
ARMREST ANGLE
ADJUSTING SCREW
SEATBACK ANGLE
ADJUSTING SCREW
Figure 14. Armrest and Seatback Adjustments
ARMREST HEIGHT
ADJUSTING SCREWS
Figure 15. Foot Platform Adjustment
FOOT
PLATFORM
BRACKET
ADJUSTMENT
SCREW