Owner`s manual

20 www.quantumrehab.com Quantum Q4
To adjust the positioning belt:
1. Once seated, insert the metal tab on one side of the belt into the plastic housing on the opposite side until you
hear a click.
2. Pull the excess strap attached to the metal tab until it is secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning belt is properly secured to the power chair and is
adjusted for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose parts or damage, including tears, worn
spots, bent hardware, damaged latch mechanisms, dirt or debris, before each use of the power
chair. If you discover a problem, contact your Quantum Rehab Provider for maintenance and
repair.
V. COMFORT ADJUSTMENTS
Figure 21. Positioning Belt Installation and Adjustment–Configuration B
Figure 20. Positioning Belt Installation and Adjustment–Configuration A