Operation Manual

18 www.pridemobility.com Celebrity X
IV. YOUR SCOOTER
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial,
throttle control lever, battery condition meter, lights switch, hazard lights switch, status LED, and horn buttons. See
figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
TURN INDICATOR
BUTTON
Figure 5. Tiller Console
HORN BUTTON
SPEED ADJUSTMENT DIAL
HORN BUTTON
BATTERY CONDITION METER
LIGHTS SWITCH
THROTTLE
CONTROL LEVER
HAZARD LIGHTS SWITCH
TURN INDICATOR
BUTTON
KEY SWITCH
STATUS LED
THROTTLE
CONTROL LEVER
Hazard Lights Switch
This switch activates the rear flashers on your scooter.
 Toggle the switch forward to turn on the flashers.
 Toggle the switch rearward to turn off the flashers.
Turn Indicator Buttons
These buttons activate the turn indicators on your scooter.
 Press the button on the side you wish to turn to activate the turn signal.
 The turn signals are timed to shut off automatically.
Lights Switch
This switch controls your scooter’s lights.
 Toggle the switch forward to turn on your scooter’s rear running lights.
 Toggle the switch to the middle to turn off the scooter’s lights.
 Toggle the switch rearward to turn on your scooter’s rear running lights and front (lower) light.
WARNING! Scooter users are required to use their lights when visibility is restricted—
day or night. Failure to use the lighting system in periods of poor visibility may result in
personal injury.