Operation Manual

Celebrity X www.pridemobility.com 31
VII. COMFORT ADJUSTMENTS
Figure 17. Seat Height Adjustment
LOWER
SEAT POST
SEAT HEIGHT
ADJUSTMENT BOLT
SEAT HEIGHT
ADJUSTMENT NUT
CLAMP-ACTION
BOLT
NUT
LOCATING
HOLES
UPPER
SEAT POST
SEAT SLIDING LEVER
SEAT ROTATION LEVER
Figure 16A. Seat Adjustment Levers
SEAT ROTATION
The seat rotation lever will lock the seat into several posi-
tions.
1. Push forward on the seat rotation lever to unlock the seat.
See figure 16A.
2. Rotate the seat to the desired position.
3. Release the lever to lock the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust the
distance between the seat and the tiller. See figure 16A.
1. Move the seat sliding lever outward.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the de-
sired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 17.
1. Remove the seat and rear shroud from your scooter. See
VIII. “Disassembly and Assembly.”
2. Loosen the seat height adjustment nut and remove it from
the bolt. Remove the bolt and washers.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired seat
height.
5. While holding the upper seat post at that height, match up
the locating holes in the upper seat post with those of the
lower seat post.
6. With one washer on the seat height adjustment bolt, insert
it through the locating holes of both the upper and lower
seat posts. Reinstall the other washer and nut and tighten.
NOTE: Ensure both washers have been reinstalled
before fully tightening the seat height adjustment nut.
7. Tighten the clamp-action bolt
8. Reinstall the rear shroud and the seat.
MIRROR ADJUSTMENT
Your scooter is equipped with two mirrors that can be manually adjusted.
1. Position yourself in a seated driving position facing forward.
2. Adjust the mirror left, right, up, or down until you have a good line of sight behind you.