Operation Manual

32 www.pridemobility.com Celebrity X
VII. COMFORT ADJUSTMENTS
Figure 19. Positioning Belt
POSITIONING BELT (OPTION)
Your scooter seat may be equipped with an auto-type positioning belt that can be adjusted for operator comfort.
See figure 19. The positioning belt is designed to help support the operator so that he/she does not slide down or
forward in the seat. The positioning belt is not designed for use as a restraining device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bot-
tom of the seat base. See figure 18.
3. Remove the two bolts on the outermost part of the rear
seat mounting strap.
4. Insert the bolt through the appropriate end of the posi-
tioning belt and then through the seat mounting strap for
each side of the scooter seat.
5. Tighten the bolts.
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the
plastic housing on the opposite strap until you hear a click.
2. Pull the strap on the right side of the belt until it is secure,
but not so tight as to cause discomfort.
MANDATORY! Prevent personal injury!
Make sure the positioning belt is properly
secured to the power chair and is adjusted
for operator comfort before each use.
MANDATORY! Prevent personal injury and
product damage! Inspect the positioning
belt for loose or damaged parts before
each use of the power chair. If you
discover a problem, contact your
authorized Pride Provider for maintenance
and repair.
Figure 18. Positioning Belt Installation
REMOVE BOLTREMOVE BOLT
SEAT MOUNTING STRAP