Operation Manual

24 www.pridemobility.com Luxor
IV. ASSEMBLY AND DISASSEMBLY
DISASSEMBLY
The seatback on your Luxor folds down and the leg rests
and seat cushion can be removed for easy transportation or
storage.
WARNING! Pinch/Crush Point Hazard! Do
not place objects or appendages in the
path of the moving parts.
To fold the Luxor:
1. Turn off the power to the controller.
2. Disconnect the controller and battery box wiring con-
nections.
3. Disconnect the battery bar.
4. Remove the battery boxes.
5. Remove the seat cushion.
6. Flip up the foot plates or remove the leg rests.
7. Press the release lever on each back cane and fold the
seatback down. See figure 22.
8. Place the power chair in freewheel mode. See figure 10.
9. Grasp the seat base and pull upward to fold the chair.
See figure 23.
To unfold your Luxor:
1. Push down on the seat base.
2. Place the chair in drive mode. See figure 11.
3. Raise the seatback until the canes lock into place.
4. Reinstall the leg rests or flip down the foot plates.
5. Reinstall the seat cushion.
6. Reinstall the battery boxes.
7. Reconnect the battery bar.
8. Reconnect the controller and battery wiring connections.
9. Place the chair in drive mode. See figure 11.
Figure 23. Luxor Folded (Shown with Seatback
Unfolded)
RELEASE
LEVER
Figure 22. Seatback Release Lever
SEAT BARS
(PUSH DOWN
TO UNFOLD
CHAIR)
SEAT BASE
(PULL UPWARD
TO FOLD CHAIR)