Operation Manual

Luxor www.pridemobility.com 25
V. COMFORT ADJUSTMENTS
Figure 25. Leg Rest Height Adjustment
COMFORT ADJUSTMENTS
After you become accustomed to using your Luxor, you
may find the need to make some adjustments to increase
your comfort. You can change the armrest height, the swing-
away footrest length, and the controller position.
WARNING! If your power chair was
configured by your authorized Pride
Provider, please consult your healthcare
professional before changing the seat
position or making any other
adjustment. Some adjustments may
degrade your power chair’s performance
and safety by changing its center of
gravity.
WARNING! Some power chair
components are heavy. You may need
assistance to lift or carry them. Please
refer to the specifications table for
specific component weights before you
disassemble the power chair.
WARNING! Remove the occupant from the
power chair before making any
adjustments.
Armrest Height Adjustment
You can adjust the armrest height.
To change the armrest height:
1. Hold the armrest and pull the pin on the side of the
armrest out. See figure 24.
2. With the release pin pulled out, move the armrest up or
down to the desired height.
3. Hold the armrest in the desired position, and release
the pin.
Swing-away Leg Rest Length Adjustment
You can change the leg rest length.
To change the leg rest length:
1. Loosen the leg rest adjustment screws. See figure 25.
2. Slide the leg rest extension up or down to the desired
length.
3. Tighten the adjustment screws.
4. Repeat for the other side.
Controller Position Adjustment
You may change the position of the controller by sliding it in
or out of its bracket.
Figure 24. Armrest Height Adjustment
RELEASE PIN
Figure 26. Controller Position Adjustment
LEVER
ADJUSTMENT
SCREWS