Operation Manual

18 www.pridemobility.com Q6 Edge
ARMREST
LOCK
ARMREST
LOCK
LEVER
V. COMFORT ADJUSTMENTS
To adjust the seat width:
1. Remove the seat cushion.
2. Loosen the armrest receiver hardware.
3. Reposition the armrest receiver to the desired seat
width.
4. Tighten the armrest receiver hardware.
5. Adjust the width of the other armrest if necessary.
6. Replace the seat cushion.
Leg Rest Width Adjustment
You can adjust the leg rest width from 40,6 to 50,8 cm
(16
to 20 in.)
. See figure 15.
To adjust the leg rest width:
1. Remove the seat cushion.
2. Loosen the leg rest receiver hardware.
3. Reposition the legrest receiver to the desired seat
width.
4. Tighten the leg rest receiver hardware.
5. Adjust the width of the other leg rest if necessary.
6. Replace the seat cushion.
Figure 16. Armrest Adjustments
Armrest Height Adjustment
You can adjust the armrest height. The height adjustment range is 7,62 cm (3 in.) in 2,54-cm (1-in.) increments.
To remove the armrest assembly:
1. Pull out the armrest lock lever. See figure 16.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest lock. See figure 16.
2. Push in the armrest lock lever.
To adjust the top height:
1. Pull out the armrest lock lever. See figure 16.
2. Pull up or push down the armrest to the desired position.
3. Push in the armrest lock lever
4. Repeat for the other armrest if necessary.