User manual

1 Detergent dispenser drawer
2
Mains-on light
This light comes on when the On/Off button is pressed,
and goes out when it is pressed again.
3 On/Off button
Press this button to switch the machine on. Press it
again to switch the machine off.
Programme Option buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before pressing the Start/Pause
button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds and the message
Err is displayed.
4 Prewash button
The machine performs a prewash cycle at 30°C max.
The prewash cycle ends with a short spin at 650 r.p.m.
in programmes for Cottons and Synthetics, and with
emptying of the water for Delicates.
This option is not available with the Wool and Mini
programmes.
For use when washing heavily soiled laundry.
6
The Control Panel
1
23
4
59678 1011
12
13 14
Spin
LPR 722
Quick
Half
Load
Extra
Rinse
Drying
Time
Start/
Pause
Prewash
Wash
Rinse
Rinse
hold
Drain
Spin
Drying
End
90°
60°Eco
60°
40°Eco
40°
30°
Drying
60°
60°Eco
40°
40°
30°
40°
30°
Cold
Soak 30°
Rinse
Softener
Drain
Spin
Mini
Cottons
Synthetics
Delicates
Wool
30°
Drying
Prewash
Delay
Start
Programme time
On/Off
1200
900
700
500
5 Spin button
Press this button to reduce the maximum speed of the
final speed proposed by the machine for the selected
programme or to select Rinse hold position.
The light corresponding to the selected spin speed
illuminates.
The following speeds are available for the different
fabrics:
• Cottons, linen: 500/700/900 max 1200 r.p.m.
• Synthetics and Wool :
500/700 max 900 r.p.m.
• Delicates and Mini:
500 max 700 r.p.m.
The light corresponding to the selected spin speed
illuminates.
Rinse hold
When Rinse Hold option is selected, the last rinse
water is not emptied out, to prevent the fabrics from
creasing. When the programme has finished, the display
will show a flashing zero, the light of the Start/Pause
button goes out, the Rinse Hold, the End pilot lights in
the progress display are alight and the door is locked to
indicate that the water must be emptied out.
To empty out water there are 2 possibilities:
• Select Drain programme:
The water is emptied out without spinning.
• Select Spin programme: reduce eventually the spin
speed by means of the relevant button and then press
the Start/Pause button.
The water is emptied out and the laundry is spun at
the selected spin speed.
Attention! Before selecting Drain or Spin
programmes, the selector dial has to be positioned on
«O» (cancelling).
132967670.qxd 31/10/2007 15.52 Pagina 6