Instant Voice Over Booth Installation Guide

WARRANTY
Please inspect panels immediately after purchase and before mounting. Primacoustic Broadway acoustic panels are guaranteed to be free of manufacturing defects for a period of
thirty (30) days after purchase. In the unlikely event that a defect is uncovered, please call 604-942-1001 to obtain an RA number (Return Authorization number) from Primacoustic
before the thirty (30) day warranty period expires. Once you have obtained an RA number you must return the product, freight prepaid, within fi fteen (15) days after the date the RA
number is issued. Please return the product in the original packaging (or another, affording an equal degree of protection) with all of the following: (1) RA number clearly marked on
the returned package; (2) a receipt or bill of sale showing proof of purchase from an authorized retail seller; and (3) a written note describing the defect and including your name,
address, telephone number and the applicable RA number. You are solely responsible for all shipping and insurance costs for returning the product to Primacoustic, and you will not
be reimbursed or compensate for any loss or damage incurred during return shipping. Primacoustic will at its discretion repair or replace the panel. Should the panel be no longer
available, Primacoustic reserves the right to exchange this with a panel of similar performance and value. Due to different dye lots, Primacoustic cannot guarantee exact color match.
This Warranty shall solely extend to the original owner and is limited to manufacturing defects and excludes any damage due to wear and tear, abuse, misuse, misapplication, color
fading or deterioration due to prolonged exposure to ultra violet light, smoke, humidity or other environmental factors. It is understood that the use and suitability of Broadway is
entirely the responsibility of the buyer or specifying engineer and as such, these parties agree to hold Primacoustic, or it’s associated company, and/or offi cers, harmless from any
responsibility whatsoever other than what is clearly outlined in this warranty.
Primacoustic is a division of Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam, BC Canada V3C 5M5
Tel: [phone] • Fax [phone] • [e-mail]
FlexiBooth™ manual v1.0 Part# R870 2048 00
WALL MOUNTING INSTRUCTIONS
The FlexiBooth™ is mounted by means of a French cleat (wall cleat). The wall cleat is screwed directly to the studs or secured using plastic anchors.
Once the wall cleat is in place the FlexiBooth is lifted up and it’s beveled cross support locks together with the wall cleat creating a strong and secure
hold. The wall cleat can be screwed directly into the wall studs or mounted to hollow core drywall using the included plastic anchors. For masonry and
cement block use an appropriate anchor made for that material.
WALL MOUNTING INSTRUCTIONS
7.5"
(190mm)
Mount wall cleat directly
to studs or use anchors.
Top of wall cleat is 7.5” (195mm)
below the top of the FlexiBooth.
With the help of a second person, lift the completed FlexiBooth up and
gently rest the beveled cross support onto wall cleat. The opposing
beveled edges will lock together and safely support the FlexiBooth on
the wall.
Begin by drilling two 1/8” holes in the wall cleat
for the heavy-duty 2” screws.
Select the wall location where you would like to hang your FlexiBooth.
Use your bubble level to mark a horizontal line where the top of the
FlexiBooth will be. Measure down from that line 7.5 inches (195mm) and
mark a second horizontal line. Mount the wall cleat on this lower line.
Note the orientation of
the beveled edge on
the wall cleat.
Use a screwdriver or cordless drill to fasten the wall
cleat to the studs, or to appropriate anchors. Ensure
the beveled side is up (see diagram).
21
3 4