User guide

<
Using the D20 Compact Disc Player
5
PLAYING A DISC
To insert a disc
• Hold down the COMMAND button on the front panel, or press the
OPEN button on the remote control, to open the tray.
• Place the CD in the tray with the label uppermost.
• Press the COMMAND button on the front panel or the OPEN button on
the remote control to close the tray.
If you close the tray using the remote control the front panel display briefly
shows the total number of tracks on the disc, and the total duration of the disc.
For example:
23 74.07
INDEXTRACK
MIN
SEC
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
To play a disc
• Press the COMMAND button on the front panel, or the PLAY button on
the remote control.
While a disc is playing the front panel display shows the current track number,
the current index number, and the time of the current track.
For example:
4 1 3.45
INDEXTRACK
MIN
SEC
4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
>
Note: If the disc does not include index points, the index number will be
shown as 1.
To stop play
• Press the STOP button on the remote control.
To pause play
• Press the COMMAND button on the front panel or the PLAY button on the
remote control
The pause indicator will be shown on the front panel display:
4 1 3.57
INDEXTRACK
MIN
SEC
4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
> =
You can then resume play by pressing the COMMAND button on the front
panel or the PLAY button on the remote control.
LOCATING A POSITION ON THE DISC
You can step between tracks to locate a particular track on the disc, or you
can scan forwards or backwards to locate a position within a track.
To step between tracks
• Press the PREV or NEXT buttons on the front panel, or the [ or ] buttons
on the remote control.
You can hold down the button to step quickly between tracks.
§2 Using 7/12/00, 12:30 pm5