Owner's Manual

I25 Prisma Integrated Amplifier User Guide 15
CONFIGURING THE SETTINGS
Using the settings menus
You can view and change the I25 settings from the front
panel, remote control, or using the Prisma app.
To display the settings menu
Simultaneously press the A and V buttons on the front
panel, or press the MENU button on the remote control.
The settings menu is displayed:
I25 SETTINGS 20
INPUT
AUDIO
GENERAL
To step between settings
Press the A or V buttons on the front panel or remote
control.
The current setting is shown highlighted.
To change a setting
Hold down the A button on the front panel, or press
the SELECT button on the remote control.
The current value is shown highlighted.
Press the A or V buttons on the front panel or remote
control to change the value of the setting.
As you change it the new value is shown in the menu.
Hold down the A button on the front panel, or press
the SELECT button on the remote control, to save the
value you have set.
To navigate back or cancel editing a setting
Hold down the V button on the front panel, or press
the button on the remote control.
To exit from the settings menu
Simultaneously press the A and V buttons on the front
panel, or press the MENU button on the remote control.
l
l
l
l
l
l
l
INPUT SETTINGS
The INPUT SETTINGS menu allows you to customise the
inputs to suit the sources in your system:
A1 SETTINGS 20
INPUT A1
ALIAS A1
STATUS ENABLED
INPUT
Initially the INPUT SETTINGS shows the settings for the
currently selected input. Alternatively the INPUT option
allows you to step between all the inputs. The subsequent
options will change according to the input.
ALIAS
Allows you to give the source a name; eg RADIO.
Highlight the ALIAS item then hold down the A button
on the front panel, or press the SELECT button on the
remote control.
The RENAME INPUT menu is displayed:
RENAME INPUT 20
A
Press the A or V buttons on the front panel, or the < or
> buttons on the remote control, to select the first letter.
Hold down the A button on the front panel, or press
the SELECT button on the remote control, to select it.
After adding each character you have the options:
ADD NEW CHARACTER
CONFIRM ‘A’
CLEAR ALIAS
where CONFIRM shows the alias you have entered so far.
Select ADD NEW CHARACTER to add the remaining
letters, up to a maximum of six characters.
Select CONFIRM when you have entered the alias you
want.
l
l
l
l
l
STATUS
Choose between ENABLED (default) or DISABLED to
specify whether the input is enabled.
AUTO SENSE
Choose between: SELECT to automatically select an input
containing an audio signal if the I25 is on; WAKE+SELECT
to automatically wake up the I25 from standby, if
necessary, and select an input containing an audio signal;
and OFF (default) to disable automatic switching.
VOLUME
Choose between VARIABLE (default) or FIXED to specify
whether the input should have variable or fixed gain.
FIXED is 0dB gain, equivalent to volume setting 66, and
will overrule MAXIMUM VOLUME in AUDIO SETTINGS.
Selecting FIXED will show a loud-volume warning. Select
YES
to proceed or NO to cancel the fixed gain setting.
Fixed gain functions as an SSP (Surround Sound Pass-
through) allowing the I25 to be used as an amplifier in a
multi-channel system setup
INPUT GAIN
Choose between: -30dB to -1dB, 0dB (default), or +1dB to
+30dB to set the gain for the selected input.
If the gain is set too high on an input clipping may occur,
and the message:
DECREASE INPUT GAIN
will be displayed. In this case reduce the gain until the
warning message is not displayed.