User guide

> Setting up the sources
20
To disable or enable sources
• Use the INPUT SELECTOR on the front panel or the A
and V buttons on the remote control to highlight
INPUT SETTINGS on the SETUP MENU and press
the SELECT button on the front panel or remote control
to select it.
The INPUT SETTINGS menu will be displayed:
• Use the VOLUME control on the front panel or the <
and > buttons on the remote control to select the
number of the input you want to enable or disable.
• Use the INPUT SELECTOR on the front panel or A
and V buttons on the remote control to highlight
STATUS, and press the SELECT button on the front
panel or remote control to select ENABLED or
DISABLED as required.
EDITING SOURCES
To edit an existing source
• Highlight INPUT SETTINGS in the SETUP MENU and
press the SELECT button on the front panel or remote
control to select it.
• Use the VOLUME control on the front panel or the <
and > buttons on the remote control to select the input
you want to edit.
• Use the INPUT SELECTOR on the front panel or the A
and V buttons on the remote control to highlight the
options for the inputs, and use the VOLUME control on
the front panel or the < and > buttons on the remote
control to modify them as required.
The options are explained in the following table:
Option Description
STATUS ENABLED or DISABLED to specify whether the
source can be selected from the front panel or
remote control.
ALIAS A name of up to eight characters for the source;
see To edit the source alias below.
AUDIO The audio input used for the source: ANALOG 1
to ANALOG 8, DIGITAL 1 to DIGITAL 8,
EXTERNAL, or NONE.
VIDEO The video input used for the source: VIDEO 1 to
VIDEO 4, S-VIDEO 1 to S-VIDEO 3,
COMPONENT1 to COMPONENT2 or NONE.
12V The state of up to four switches, to control
external devices.
OFFSET Allows you to vary the sensitivity of analog or
external sources between - 10.0dB to
+ 10.0dB in 0.5dB steps.
MODE The default surround mode for the source:
BYPASS, STEREO, 2-CH, PRO LOGIC, PLII
PL, PLII CINEMA, PLII MUSIC, PARTY, DTS
NEO:6 CINEMA, or DTS NEO:6 MUSIC. The
options available depend on the audio mode.
TV-SYSTEM Specifies the TV system for the video input:
NTSC, PAL, or DEFAULT.
To edit the source alias
• Highlight ALIAS in the INPUT SETTINGS menu and
press the SELECT button on the front panel or remote
control to edit the alias.
• Select the character you want to edit using the INPUT
SELECTOR on the front panel or the A and V buttons
on the remote control.
§6 Sources 26/7/02, 12:52 pm20