User guide

> Introduction
2
Easy to set up
The SP31.7 is also exceptionally easy to set up for a
perfectly balanced surround sound. Simply plug a microphone
into the appropriate SP31.7 input, and position it at the
listening position. The built-in calibration test will then
balance the level of each output to give a correct sound
image for your system and the room you are listening in.
USING THE SP31.7 WITH OTHER PRIMARE
PRODUCTS
Although the SP31.7 is flexible enough to work with virtually
any other equipment you have in your system, it is ideal for
use with the other products in the Primare range, including
the Primare A30.5 Multi-Channel Amplifier and the Primare
V25 DVD Player. A particular benefit of using the SP31.7
with the Primare DVD Player is that you can control both
units with the single remote control, to give you a fully
integrated system with the simplest possible user interface.
TECHNICAL SPECIFICATION
General
Analog inputs 1 XLR, 7 RCA (left and right).
Digital inputs 1 AES/EBU, 5 RCA, 2 TOSlink.
Video inputs 4 composite, 3 S-Video,
2 component.
Balanced analog outputs Front (left and right).
Analog outputs Front (left and right), center,
subwoofer, surround (left and right),
surround back (left and right).
Analog record output 2 RCA (left and right).
Digital outputs 1 TOSlink, 1 RCA.
Video outputs 2 composite, 2 S-Video, 1 component.
General (continued)
Modes Dolby Pro Logic
Dolby Pro Logic II
Dolby Digital 5.1
Dolby Digital
Surround EX 6.1
Dolby Digital Matrix 6.1
DTS Neo:6
DTS 5.1
DTS ES 6.1
DTS ES 6.1 Discrete
Surround EX 7.1
Video NTSC/PAL, component, S-Video, and
composite.
Analog data
Bandwidth 1Hz – 100kHz, 1dB
THD <0.005%, 20Hz – 20kHz
Signal-to-noise -110dB
Frequency response <10Hz – 100kHz, -1dB
Input impedance 15kΩ unbalanced, 10kΩ balanced
Output impedance 50Ω
Digital data
Frequency response 20Hz – 20kHz, ± 2dB
THD+noise 0.005% @ 1kHz
Dimensions (WxDxH) 430 x 385 x 100mm
Weight 10kg
§1 Introduction 26/7/02, 12:51 pm2