User guide

4
SP31 MULTI-CHANNEL PROCESSOR USER GUIDE
HOW TO GET STARTED
Switching on and off
To switch on
•Use the main switch on the back side (1).
During normal operation you can leave the SP31 switched
on and in standby mode.
To switch to standby
•Hold down the button on the front panel or the
remote control.
When the SP31 is in standby mode the green indicator
will be illuminated.
To switch on from standby
•Press the button on the front panel or on the remote
control.
Power connection
WARNING: Before connecting power
check that the required supply voltage,
indicated on the back panel, corresponds
to your local AC supply. If a different voltage is stated on
the type plate do not connect the SP31 to the mains
power, and seek advice from your dealer.
Connect the mains power using the enclosed mains cable.
NOTE: Always disconnect the SP31 from the mains
power before connecting or disconnecting any of the
cables.
1