User guide

17
SP31 MULTI-CHANNEL PROCESSOR USER GUIDE
After a short delay a message will confirm that the settings
have been saved:
•Wait 10 seconds to allow the settings to be completely
stored.
•Press the button on the front panel or remote
control to return to the MEMORY MENU.
To recall your settings
•Highlight RECALL SETTINGS in the MEMORY
MENU. Then press the button on the front panel
or the SELECT button on the remote control to select
the required option.
The following screen then confirms that your settings have
been recalled:
To recall the installer or factory settings
NOTE: This will lose any inputs you have defined, or any
calibration changes you have made. You should save your
settings first if you have not already done so.
•Highlight RECALL INSTALLER SETTINGS or
RECALL FACTORY SETTINGS in the MEMORY
MENU. Then press the button on the front panel
or the SELECT button on the remote control to select
the required option.
After a short delay a screen will confirm that the appropri-
ate settings have been recalled:
•Press the button on the front panel or remote
control to return to the MEMORY MENU.
•Press the button on the front panel or the remote
control to return to the MEMORY MENU.
USING MENUS